Passive NPN Input Programmable Logic Controller Module 2AI PID Auto Tuning
Passive NPN Input Programmable Logic Controller Module 2AI PID Auto Tuning 32K Program Capacity Industrial Control PLC Support PID Auto-Tuning Passive NPN Input Dimension 130*90*36mm Cutout size 122*99mm Installation Fixed hole installation and DIN-Rail (35mm ) Features Support interrupt, linear arc interpolation, PID auto-tuning. 32K program capacity, 32K retentive register I/O level Input: Passive NPN, public terminal isolated Relay output: Normally open dry contact Digital
Passive NPN Input Programmable Logic Controller Module 2AI PID Auto Tuning
32K Program Capacity Industrial Control PLC Support PID Auto-Tuning Passive NPN Input
| Dimension | 130*90*36mm |
| Cutout size | 122*99mm |
| Installation | Fixed hole installation and DIN-Rail (35mm ) |
| Features | Support interrupt, linear arc interpolation, PID auto-tuning. 32K program capacity, 32K retentive register |
| I/O level |
Input: Passive NPN, public terminal isolated Relay output: Normally open dry contact |
| Digital I/O | 16DI/16DO |
| DO type and load |
Relay(MR) or transistor(MT) or mixed(MRT) MOS tube: 2A/point, 4A/4 point COM; Transistor MT: 0.5A/point, 0.8A/4 point COM, 1.6A/8 point COM; MR: 2A/point, 4A/4 point COM, 5A/8 Click COM. |
| High speed counting | Single phase 6 channel 60KHz, or 2 AB 60KHz + 1 AB 10KHz, or 2 ABZ 60KHz + 1 AB phase 10 KHz |
| High speed pulse | 8 channels, Y0-Y3 is 100KHz, Y4-Y7 is 10KHz |
| High-speed counting + high-speed pulse < 480KHz | |
|
Analog I/O (optional) |
2AI |
|
AI type (optional) |
Type E/E_/K/K_/S/S_/T/T_/J/J_ thermocouple / PT100/ PT1000/ NTC10K/ NTC50K/ NTC100K/ 0~10V/ 0~5V/ 0-20mA/ 4-20mA/ -5V~5V/ -10V~10V |
|
AO type (optional) |
0~10V/ 0-~5V/ 0~20mA/ 4~20mA -5~5V/ -10~10V (2DA for 1 minus voltage) |
| Default | 1 Mini type B USB programming port, 1 RS232 programming port (Interface terminal is mouse female port with 8 holes), 2 RS485 COM ports |
| Optional |
Default 2 RS485 COM ports can be customized as 1 RS485, 1 RS232 COM ports, or 1 RS485 COM port, 1 CAN (2.0A/B), or 1 RS232 COM port, 1 CAN (2.0A/B) |
| Software | Compatible with GX WORKS 2 |
1. Highly integration.At most 40Dl40DO (digital type can be customized transistor,relayor mixed),16Al (analginput can be customized temperature, current, voltage or mixed)/8AO (analog output can be customizedcurrent, voltage or mixed).
2. Comes with 2PLC programming ports: Mini typeB usb port(speed of reading and downloading is more faster)and RS 232(8-hole mouse head female seat), normally have 2RS 485 ports,both RS 232 and CAN are optional.
3. Support mult-channels high-speed counting and high-speed pulse. High-speed counting normally single-phase6 6OKHz orAB(Z)phase 2 6OKHZ+110KHz. High-speed pulse normally Yo-Y3 each channel100KHz,Y4-Y7 each channel 10KHz, acceleration and deceleration individually.The total amount of HSC and HSPoutput can not exceed 480KHz.
4. Support special enaryption. Setting 12345678 as password can thoroughly prevent the data from being read.(Attention : Only supports 8-bit password encryption)
5. 32K steps of program capacity, 32K power-failed holding registers which support interrupting, linear arcinterpolation and PID auto-tuning.
6. Use 5.0mm pitch pluggable terminals for easy wiring; use DlN rail (35mm wide) and mounting holes forinstalling.
7. Super function.Compatible with FX3G/FX2U/FX3S series PLC, operation speed more fast.
Hand wheel connection:
Wiring:
1. USB-232 serial port cable 2. PLC download cable
3. Mini type-B PLC download cable
(Note: Functions of cable 1 and 2 = Functions of cable 3)
4. HMI programming cable
5. Power supply (DC24V)
Recommended Products
Video
Video
Video
Video
Video
Video
Video
Video