Two Phase Liquid Cooling Immersion Cryptocurrency Cooler

Name: Two Phase Liquid Cooling Immersion Cryptocurrency Cooler
Brand: Shanghai Shenglin M&E Technology Co., Ltd.

Two-phase Liquid Cooling Liquid Immersion Cooling Systems For Cryptocurrency Mining Farms What's Immersion Cooling? Also known as liquid submersion cooling. It is the practice of submerging computer components (or full servers) in a thermally, but not electrically, conductive liquid (dielectric coolant) allowing higher heat transfer performance than air and many other benefits. Why many large data centers have already moved or are considering the move to immersion cooling? 1.

Place of Origin China

Packaging Details Stretch film and Pallet for full container loading

Media Electrocool dielectric coolants

Power supply 380V/3P/50Hz or 380V/3P/60Hz

Model Number SHSL-D1 Series

Fin material Hydrophilic aluminum foil or epoxy resin aluminum foil

cooler laptop stand 3 phase elcb direct evaporative cooler

Product Description

Two-phase Liquid Cooling Liquid Immersion Cooling Systems For Cryptocurrency Mining Farms

What's Immersion Cooling?

Also known as liquid submersion cooling. It is the practice of submerging computer components (or full servers) in a thermally, but not electrically, conductive liquid (dielectric coolant) allowing higher heat transfer performance than air and many other benefits.

Why many large data centers have already moved or are considering the move to immersion cooling?

1. Up to 25% increase in power efficiency

2. Up to 80% cost reduction

3. Up to 60% hashrate increase

4. 50%+ equipment lifespan.

Introduction of Two-phase Liquid Cooling:

The cooling liquid undergoes a phase change in the process of circulating heat dissipation. The cooling liquid takes away the heat from the server and then undergoes a phase change gasification. The gaseous cooling liquid is condensed by the condenser and becomes liquid again and returns to the liquid cooling tank; the cooling liquid can use 3M electronics The boiling point of the coolant FC-72 and FC-72 is above 50℃.
In this case, the temperature of the water in the condensing coil does not need to be too low. The use of a dry cooler can meet the heat exchange requirements and take away the heat.
The two-phase liquid cooling has a high heat transfer efficiency due to the phase change of the electronic cooling liquid.
The disadvantage is that during this phase change, the electronic fluorinated liquid will escape during the vaporization process, so there is a certain degree of tightness of the container. However, it should not be too sealed to prevent the cooling system from being interrupted and the cylinder explosion event, so certain safety facilities need to be set up.

Technical parameter

Dry cooler D1 series parameter (fin space 2.1mm)

Type							D1-005- 1x350	D1-006- 1x350	D1-007- 1x350	D1-009- 1x450	D1-011- 1x450	D1-013- 1x450	D1-014- 1x500	D1-017- 1x500	D1-020- 1x500
Capacity	Water	35℃ outdoor temp.	Inlet	45℃	△	KW	4.89	5.9	6.83	9.39	10.99	13.33	14.32	17.01	19.8
			outlet	40℃	Y
	20% Glycol		Inlet	45℃	△		4.72	5.69	6.69	8.9	10.61	13.05	13.91	16.11	19.29
			outlet	40℃	Y
Medium		Water flow				M3/h	0.85	1.03	1.2	1.63	1.91	2.3	2.5	3	3.5
		Pressure drop				kPa	36	31	58	25	40	80	50	60	40
Air flow					△	M3/h	2828	2712	2492	6199	5827	5225	8469	8168	7601
					Y
Fan motor					Phase		1	1	1	3	3	3	3	3	3
					△	W	140	140	140	540	540	540	830	830	830
					Y
					△	A	0.6	0.6	0.6	1.1	1.1	1.1	1.45	1.45	1.45
					Y
Fan					No X φ		1x1x350	1x1x350	1x1x350	1x1x450	1x1x450	1x1x450	1x1x500	1x1x500	1x1x500
Sound pressure level					△	dB(A)	31	31	31	43	43	43	49	49	49
					Y	10m
Dimension					L	mm	870	870	870	1020	1020	1020	1220	1220	1220
					W	mm	525	525	525	625	625	625	825	825	825
					H	mm	797	797	797	820	820	820	870	870	870
					A	mm	690	690	690	840	840	840	1040	1040	1040
					B	mm	--	--	--	--	--	--	--	--	--
					C	mm	--	--	--	--	--	--	--	--	--
					D	mm	490	490	490	490	490	490	490	490	490
Inlet φ						mm	3/4”	3/4”	3/4”	1”	1”	1”	1-1/4”	1-1/4”	1-1/4”
Inlet φ						mm	3/4”	3/4”	3/4”	1”	1”	1”	1-1/4”	1-1/4”	1-1/4”
Product weight(empty)						kg	38	42	48	55	60	67	75	82	91

Note: Standard SHSL-D1 dry cooler is vertical air discharge, for horizontal air discharge please add “H” in nomenclature, for excmple:SHSL-D1-005H-1X350

Some data center cooling reference:

For data center cooling:

Country: Mongolia

Application: match with precision air conditioner

Cooling capacity: 17.6kW

Cooling medium: 34% ethylene glycol

Supply power: 400V/3P/50Hz

Fan brand: Ziehl-Abegg

Country: Russia

Application:data center cooling

Cooling capacity: 763kW

Cooling medium: water