Machinery Welding Equipment Other Welding Equipment

Servo Motor Pull Mesh Hopper Construction Mesh Welding Machine Load 1T

Name: Servo Motor Pull Mesh Hopper Construction Mesh Welding Machine Load 1T
Brand: Anping Dixun Wire Mesh Products Co., Ltd

Servo Motor Pull Mesh Hopper Load 1T Construction Mesh Welding Equipment Introduction of Construction Mesh Welding Equipment: The construction mesh welding equipment is composed of pay-off frame, welding machine, cutting machine and electric control cabinet. The line wire is fed by 24 pay-off stands, and the cross wire is pre-straightened by wire straightening and cutting machine. The iron wire is welded into a mesh by the construction mesh welding equipment and then enters

Labor cost 1 person

Usage Welding Fence Meshes

Welding speed 75-85 times/min

Place of Origin China

Warranty 2 Years

Control system PLC+touch Screen

ice sculpture machine step motor unipolar ss 316 wire mesh

Product Description

Servo Motor Pull Mesh Hopper Load 1T Construction Mesh Welding Equipment

Introduction of Construction Mesh Welding Equipment:

The construction mesh welding equipment is composed of pay-off frame, welding machine, cutting machine and electric control cabinet. The line wire is fed by 24 pay-off stands, and the cross wire is pre-straightened by wire straightening and cutting machine. The iron wire is welded into a mesh by the construction mesh welding equipment and then enters the mesh cutting machine and automatically cuts into the mesh. The construction mesh welding machine is mainly used for the resistance point (pressure) welding function of the line wire and the cross wire and the continuous mesh discharge. This construction mesh welding machine is mainly used to make wire diameter 3-6 low-carbon steel wire or galvanized wire.

Features of Construction Mesh Welding Equipment:

1. Cross wire dithering device.

Pneumatic shaking device is added to the cross wire feeding system to prevent cross wire winding. Reduce mechanical operation
failures.

2. Cross wire feeding system moving device.

The engineer specially added a mobile device to the cross wire feeding system, which can facilitate the customer to adjust the mesh size and move the welding electrode.

3. Cross wire positioning device.

The cross wire positioning device adopts the cylinder type, which can more sensitively adjust the cross wire position and increase the welding speed.

4. Line wire straightening wheel.

Each line wire will pass through the straightening wheel, which can make the mesh more flat and beautiful.

5. Connecting copper block.

The connection between transformer and electrode uses copper block instead of soft copper leaf, which has better quality and conductive effect.

6. Electrode and copper base.

The electrode and copper base are all made of high chromium copper, which is a special alloy material with wear resistance and high temperature resistance. Increase the service life of the electrode.

7. Pull mesh system.

The mesh pulling system adopts servo motor, which can improve the accuracy of mesh size and make the mechanical operation more
smooth.

Technical Parameters of Construction Mesh Welding Equipment:

Item	DX-1200A	DX-1600A	DX-2000B	DX-2500A
Number of Electrodes	24	32	20	48
Max.Mesh Width	1200mm	1600mm	2000mm	2500mm
Wire Diameter	2.5-6.0mm	2.5-6.0mm	3.0-6.0mm	3.0-6.0mm
Cross Wire Space	50-250mm	50-250mm	100-250mm	50-250mm
Line Wire Space	50-250mm	50-250mm	50-250mm	50-250mm
Finished Products Way	Panel Mesh
Pulling Mesh Way	Servo Motor
Electric Capacity	125KVA*3	125KVA*4	125KVA*5	125KVA*6
Welding Speed	50-80t/min	50-80t/min	50-80t/min	50-80t/min
Control System	PLC & Touch Screen