Metal Drilling Tin Coating 4mm Solid Carbide Drill Bit
Tungsten carbide drill bits, micro drills,solid tungsten carbide drill bits,small carbide drill bits A drill bit, is a cutting tool that can create holes by machining workpiece in rotating motion. There are many sizes and shapes drill bits, which have been standardized in metric or inch systems, and the cross-sections of most drill bits are circular, but some special drill bits can produce holes of which cross-sections are not circular . Fixed shank carbide drill bit standard
Tungsten carbide drill bits, micro drills,solid tungsten carbide drill bits,small carbide drill bits
A drill bit, is a cutting tool that can create holes by machining workpiece in rotating motion. There are many sizes and shapes drill bits, which have been standardized in metric or inch systems, and the cross-sections of most drill bits are circular, but some special drill bits can produce holes of which cross-sections are not circular .
Fixed shank carbide drill bit standard size:
| d Cutting diameter | D Shank diameter | Lc Cutting length(mm) | L Overall length (mm) |
| 0.20-0.25mm | 3.0mm | 2mm | 38/40mm |
| 0.26-0.55mm | 3.0mm | 3mm | 38/40mm |
| 0.56-0.95mm | 3.0mm | 6mm | 38/40mm |
| 0.96-1.20mm | 3.0mm | 7mm | 38/40mm |
| 1.21-1.60mm | 3.0mm | 8mm | 38/40mm |
| 1.66-1.95mm | 3.0mm | 9mm | 38/40mm |
| 1.96-2.50mm | 3.0mm | 12mm | 38/40mm |
| 2.51-3.00mm | 3.0mm | 12mm | 38/40mm |
| 3.01-3.175mm | 3.175mm | 12mm | 50mm |
| 3.176-4.00mm | 4.0mm | 18mm | 50mm |
| 4.01-5.00mm | 5.0mm | 22mm | 50mm |
| 5.01-5.50mm | 6.0mm | 25mm | 50mm |
| 5.51-6.00mm | 6.0mm | 25mm | 50mm |
| 6.01-8.00mm | 8.0mm | 30-40mm | 75-80mm |
1,Tip angle 118°,d tolerance within 0.005mm
2, Standard size in stock, ready to ship.
2, Accept customize.
Parameters setting for carbide drill bit milling different materials:
|
Work piece material |
Strength of extension σ b/MP a |
Hardness HB | Feed f/(mm/r) | Speed V/(m/min) |
Coolant |
||
| d/mm | |||||||
| 5~10 | 11~30 | 5~10 | 11~30 | ||||
|
Tool steel |
1000 1800~1900 2300 |
300 500 575 |
0.08~0.12 0.04~0.15 <0.02 |
0.12~0.2 0.05~0.08 <0.03 |
35~40 8~11 <6 |
40~45 11~14 7~10 |
Water-insoluble cooling oil
|
| Nickel chrome steel |
1000 1400 |
300 420 |
0.08~0.12 0.04~0.05 |
0.12~0.2 0.05~0.08 |
35~40 15~20 |
40~45 20~25 |
|
| Cast steel | 500~600 | —— | 0.08~0.12 | 0.12~0.2 | 35~38 | 38~40 | |
| Stainless steel | —— | —— | 0.08~0.12 | 0.12~0.2 | 25~27 | 27~35 | |
| Heat resistant steel | —— | —— | 0.01~0.05 | 0.05~0.1 | 3~6 | 5~8 | |
| Gray iron | —— | 200 | 0.2~0.3 | 0.3~0.5 | 40~45 | 45~60 | Dry cut or emulsion |
| Alloy iron | —— | 230~350 | 0.03~0.07 | 0.05~0.1 | 20~40 | 25~45 |
Water-insoluble cooling oil or emulsion
|
| —— | 350~400 | 0.03~0.05 | 0.04~0.08 | 8~20 | 10~25 | ||
| malleable cast iron | —— | —— | 0.15~0.2 | 0.2~0.4 | 35~38 | 38~40 |
Dry cut or emulsion |
| Brass | —— | —— | 0.07~0.15 | 0.1~0.2 | 70~100 | 90~100 | |
| Cast bronze | —— | —— | 0.07~0.1 | 0.09~0.2 | 50~70 | 55~75 | |
| Aluminum | —— | —— | 0.15~0.3 | 0.3~0.8 | 250~270 | 270~300 | Dry cut or gasonline |
| Hard rubber | —— | —— | 0.2~0.4 | 30~60 | |||
| Thermosetting resin | —— | —— | 0.04~0.1 | 60~90 | |||
| Plastic | —— | —— | 0.05~0.25 | 30~60 | |||
| Glass | —— | —— | Manual | 4.5~4.7 | |||
| Glass fiber composite material | —— | —— | 0.063~0.127 | 198 | |||
Specification:
Diameter:1~20mm
Coating:Altin/Tialn/Tin/Tisin/Nano,Uncoated,Optional
Commonly used materials for drill bits are low carbon steel, high carbon steel, high speed steel, cobalt steel, tungsten carbide, polycrystalline diamond, etc. Surface coatings include black oxide, titanium nitride (TiN), titanium aluminum nitride (TiAlN), titanium carbonitride (TiCN) and diamond powder.
Recommended Products
Video