Slurry knife gate valve

Name: Slurry knife gate valve
Brand: COOSAI valve group

Slurry knife gate valve - Work principle: Coosai SKSE Slurry knife gate valve adopts a push-in design to discharge a minimum of process medium between valve opening and closing. In the operation, the valve sleeve provides a pressure barrier by sealing each other. The gate separates the sleeve during operation.When the gate from the open to the closed position, there will be a little of fluid discharge . The small amount of liquid discharged will flow out through the bottom of

Brand Name COOSAI

Place of Origin CHINA

Price 100

Delivery Time 30 WORK DAYS

Minimum Order Quantity 1

Packaging Details PLYWOOD CASE

sliding gate cantilever pp diaphragm valve knife wood block

Product Description

Slurry knife gate valve

- Work principle:

Coosai SKSE Slurry knife gate valve adopts a push-in design to discharge a minimum of process medium between valve opening and closing. In the operation, the valve sleeve provides a pressure barrier by sealing each other. The gate separates the sleeve during operation.When the gate from the open to the closed position, there will be a little of fluid discharge . The small amount of liquid discharged will flow out through the bottom of the valve and safely flow to the designated position under the action of the splash plate ,which installed in the bottom of the valve.

And the bottom of gate is wedge design, and arc of section can guarantee pressure sealed soft seat will not be damaged when valve close, but also prevent medium entering into valve chamber during valve open-close.

MATERIAL LIST
No.	Name	Material	No.	Name	Material
1	Body	GGG40	8	Stem Nut	Copper
2	Gate	SS304/SS316	9	Bearing	65Mn
3	Seat	NBR/EPDM	10	Support block	WCB
4	Packing	NBR/EPDM	11	Hand wheel	Ductile iron
5	Packing Gland	#45	12	Protection cover	SS304
6	Yoke	#45	13	Bolt/Nut	A2-70
7	Shaft	2Cr13	14	Bottom cover	#45