Touch Screen 500A 500mm 0.6MPa Automatic Welding Machine

Custom Hydraulic Cylinder Girth Welding Machine Model HF1000

I. Object of Welding And Instruction of Equipment
1. Object of Welding
Diameter range of the cylinder tube: 50-500mm
Length range of the cylinder tube: ≤3000mm (clamping and pressing welding methods), V and U type welding between cylinder tube and cylinder bottom as well as the circular seam between cylinder tube and flange can be welded automatically. Applicable welding base metal: 45#, 27SiMn, 35#, 20#, Stainless Steel, 25Mn, 16Mn, Q345B, etc.
2. Instruction of Equipment
2.1 Workpiece Loading & Unloading Method: Manual
2.2 Locating Method of The Workpiece: Self-centering chuck in the left clamp the workpiece to locate the center of rotation by manual.
Two supporting racks locate the center of the workpiece and rotate together with the workpiece coaxially. Pneumatic tailstock is equipped in the right end, the centre of the tailstock sustain the workpiece gyration.
2.3 Methods For Welding: Single torch gas shielded arc welding, automatic single-layer welding or multi-layer welding can be achieved once. Single-layer & single-pass welding, multi-layer & single-pass welding, multi-layer & multi-pass welding can be achieved full automatically.
2.4 The one end of the workpiece must be clamped and another end has an inner bore. The outer diameter can be supported by the contact rollers to locate the centre of the workpiece. (can weld workpiece while only the chuck clamp it directly or the chuck clamp it and the tailstock press it or the chuck clamp it and the contact rollers support it)

II. Main Technical Parameters

III. Main Components List

IV. Pictures