Multi Flute Thread Mill Cutter / Solid Carbide Milling End Mill Cutter
Multi Flute Thread Mill Cutter / Solid Carbide Milling End Mill Cutter KTC Thread Mill Cutter The affordable system with high performance allows threading and / or circlip grooving in high precision. The polygonal connection of insert and milling body improves the efficiency and precision of the process significantly: Longer tool life Higher machining volume Higher feed rates Shorter processing times High stability High security at interrupted cutting Specifications Raw
Multi Flute Thread Mill Cutter / Solid Carbide Milling End Mill Cutter
KTC Thread Mill Cutter
Specifications
| Raw Material | GU25UF |
| WC | 88% |
| Co | 12% |
| TRS | >4300N/mm2 |
| Hardness | >92HRA |
| A.O.L | 50mm-90mm |
| Grain size | 0.4 μm |
| Upto | HRC60 |
| Flutes No | 3/4F |
| Suitable for | Aluminum,plastic and other materials |
Standard Sizes
| UN 60° Inner Thread Mill Cutter for Aluminum | |||||||||
| Pitch (TPI) | UNC | UNF | UNEF | Shank Dia. | Edge Dia. | No. of Flutes | Flute Length | Overall Length | Bottom Hole Dia. |
| 36 | No.8-36 | 4 | 3 | 3 | 8.5 | 50 | 3.5 | ||
| 32 | No.10-32 | No.12-3/8-32 | 4 | 3.5 | 3 | 11.1 | 50 | 4 | |
| 28 | No.12-28,1/4-28 | 7/16,1/2-28 | 4 | 4 | 3 | 11.8 | 50 | 4.6 | |
| 28 | 1/4-28 | 7/16,1/2-28 | 6 | 5 | 3 | 12.7 | 57 | 5.5 | |
| 28 | 7/16,1/2-28 | 10 | 9.2 | 4 | 22.7 | 75 | 10.2 | ||
| 24 | No.10-24 | 5/16,3/8-24 | 9/16,11/16-24 | 4 | 3.2 | 3 | 10.6 | 50 | 3.8 |
| 24 | No.12-24 | 5/16,3/8-24 | 9/16,11/16-24 | 4 | 4 | 3 | 11.6 | 50 | 4.5 |
| 24 | 5/16,3/8-24 | 9/16,11/16-24 | 6 | 6 | 3 | 15.9 | 57 | 6.8 | |
| 24 | 3/8-24 | 9/16,11/16-24 | 8 | 7.8 | 3 | 19.1 | 60 | 8.5 | |
| 24 | 9/16,11/16-24 | 12 | 11.9 | 4 | 28.6 | 75 | 13.2 | ||
| 20 | 1/4-20 | 7/16,1/2-20 | 3/4,1-20 | 4 | 4 | 3 | 12.7 | 50 | 5.2 |
| 20 | 7/16,1/2-20 | 3/4,1-20 | 10 | 9 | 4 | 22.9 | 75 | 9.8 | |
| 20 | 1/2-20 | 3/4,1-20 | 10 | 10 | 4 | 25.4 | 75 | 11.5 | |
| 20 | 3/4,1-20 | 12 | 12 | 4 | 38.1 | 75 | 17.8 | ||
| 18 | 5/16-18 | 9/16 | 11/16,1-11/16-18 | 6 | 5.8 | 3 | 16.9 | 57 | 6.5 |
| 18 | 9/16,5/8-18 | 11/16,1-11/16-18 | 10 | 10 | 4 | 29.6 | 75 | 12.8 | |
| 16 | 3/8-16 | 3/4-16 | 8 | 7.6 | 3 | 19.1 | 60 | 8 | |
| 16 | 3/4-16 | 12 | 12 | 4 | 28 | 75 | 17.5 | ||
| 14 | 7/16-14 | 7/8-14 | 8 | 8 | 3 | 20 | 60 | 9.3 | |
| 14 | 7/8-14 | 16 | 16 | 4 | 39.9 | 90 | 20.5 | ||
| 13 | 1/2-13 | 8 | 8 | 3 | 20 | 60 | 10.8 | ||
| 12 | 9/16-12 | 1"1-1/2-12 | 10 | 10 | 4 | 28 | 75 | 12.3 | |
| 12 | 1"1-1/2-12 | 16 | 16 | 4 | 40 | 90 | 23.5 | ||
| 11 | 5/8-11 | 12 | 12 | 4 | 30 | 75 | 13.5 | ||
| 10 | 3/4-10 | 12 | 12 | 4 | 30 | 75 | 16.5 | ||
| 9 | 7/8-9 | 16 | 16 | 4 | 38 | 90 | 19.5 | ||
| 8 | 1-8 | 16 | 16 | 4 | 40 | 90 | 22 | ||
| UN 60° Outer Thread Mill Cutter for Aluminum | |||||||
| Pitch (TPI) | UNC | UNF | Shank Dia. | Edge Dia. | No. of Flutes | Flute Length | Overall Length |
| 32 | No.8-32 | 6 | 6 | 3 | 11.91 | 50 | |
| 28 | No.12-28 | 6 | 6 | 3 | 12.7 | 50 | |
| 24 | No.12-24 | 6 | 6 | 3 | 12.7 | 50 | |
| 20 | 1/4-20 | 6 | 6 | 3 | 15.4 | 50 | |
| 18 | 5/16-18 | 8 | 8 | 3 | 16.93 | 60 | |
| 16 | 3/8-16 | 8 | 8 | 3 | 19.05 | 60 | |
| 12 | 9/16-12 | 12 | 12 | 4 | 29.6 | 75 | |
| M ISO Standard 60°Inner Thread Mill Cutter for Steel | ||||||||
| Pitch (mm) | M Coarse Thread | M Fine Thread | Shank Dia. | Edge Dia. | No. of Flutes | Flute Length | Overall Length | Bottom Hole Dia. |
| 0.5 | M3*0.5 | 4 | 2.3 | 3 | 6 | 50 | 2.5 | |
| 0.5 | M6*0.5 | 4 | 4 | 3 | 10 | 50 | 5.5 | |
| 0.5 | M8-M12*0.5 | 6 | 6 | 3 | 13 | 50 | 7.5 | |
| 0.6 | M3.5*0.6 | 4 | 2.7 | 3 | 7 | 50 | 2.9 | |
| 0.7 | M4*0.7 | 4 | 3 | 3 | 8 | 50 | 3.3 | |
| 0.75 | M4.5*0.75 | 4 | 3.4 | 3 | 9 | 50 | 3.75 | |
| 0.75 | M10-M12*0.75 | 8 | 8 | 3 | 20 | 50 | 9.25 | |
| 0.8 | M5*0.8 | 4 | 4 | 3 | 10 | 50 | 4.2 | |
| 1 | M6*1.0 | 6 | 4.8 | 3 | 12 | 57 | 5.0 | |
| 1 | M8*1.0 | 6 | 6 | 3 | 16 | 57 | 7.0 | |
| 1 | M10*1.0 | 8 | 8 | 3 | 20 | 60 | 9.0 | |
| 1 | M12*1.0 | 10 | 10 | 4 | 22 | 75 | 11.0 | |
| 1 | M16*1.0 | 12 | 12 | 4 | 22 | 75 | 15.0 | |
| 1 | M20-M48*1.0 | 16 | 16 | 4 | 30 | 90 | 19.0 | |
| 1.25 | M8*1.25 | 6 | 6 | 3 | 16 | 57 | 6.75 | |
| 1.25 | M12-M14*1.25 | 10 | 10 | 4 | 25 | 75 | 10.75 | |
| 1.5 | M10*1.5 | 8 | 8 | 3 | 20 | 60 | 8.5 | |
| 1.5 | M12-M20*1.5 | 10 | 10 | 4 | 28 | 75 | 10.5 | |
| 1.5 | M14-M24*1.5 | 12 | 12 | 4 | 28 | 75 | 12.5 | |
| 1.5 | M20-M48*1.5 | 16 | 16 | 4 | 30 | 90 | 18.5 | |
| 1.75 | M12*1.75 | 10 | 9.8 | 4 | 30 | 75 | 10.25 | |
| 2 | M14*2.0 | M15-M16*2.0 | 10 | 10 | 4 | 30 | 75 | 12.0 |
| 2 | M16*2.0 | M17-M20*2.0 | 12 | 12 | 4 | 30 | 75 | 14.0 |
| 2 | M20-M80*2.0 | 16 | 16 | 4 | 40 | 90 | 18.0 | |
| 2.5 | M18-M20*2.5 | 14 | 14 | 4 | 36 | 85 | 15.5 | |
| 2.5 | M20-M80*2.5 | 16 | 16 | 4 | 40 | 90 | 17.5 | |
| 3 | M24*3.0 | 16 | 16 | 4 | 42 | 90 | 21.0 | |
| 0.75 | M6*0.75 | 6 | 4.8 | 3 | 12 | 60 | 5.25 | |
| 0.75 | M8*0.75 | 6 | 6 | 3 | 16 | 60 | 7.25 | |
| 1.25 | M10*1.25 | 8 | 8 | 3 | 20 | 60 | 8.75 | |
| M ISO Standard 60°Outer Thread Mill Cutter for Steel | ||||||
| Pitch (mm) | M Coarse Thread | Shank Dia. | Edge Dia. | No. of Flutes | Flute Length | Overall Length |
| 0.5 | M3*0.5 | 4 | 4 | 3 | 6 | 50 |
| 0.7 | M4*0.7 | 4 | 4 | 3 | 8 | 50 |
| 0.75 | M4.5*0.75 | 4 | 4 | 3 | 9 | 50 |
| 0.8 | M5*0.8 | 4 | 4 | 3 | 10 | 50 |
| 1 | M6*1.0 | 6 | 6 | 3 | 13 | 57 |
| 1.25 | M8*1.25 | 6 | 6 | 3 | 16 | 57 |
| 1.5 | M10*1.5 | 8 | 8 | 3 | 20 | 60 |
| 1.75 | M12*1.75 | 10 | 10 | 4 | 28 | 75 |
| 2 | M14*2.0 | 10 | 10 | 4 | 30 | 75 |
| 2.5 | M18*2.5 | 14 | 14 | 4 | 36 | 85 |
| 3 | M24*3.0 | 16 | 16 | 4 | 40 | 90 |
FAQ
Q: Are you trading company or manufacturer ?
A: we are the manufacturer Specializing in High-End carbide cutting tools and non-standard cutting tools, OEM&ODM accept;
Q: How long is your delivery time?
A: Generally 1- 35 working days, it depends ;
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer our stock sample for free charge and you please pay the cost of freight.
custom cutting tools negotiated then we will quote the best sample cost.
If you have another question, pls feel free to contact us.
Recommended Products
