Fast Vacuum Generator MEAC With Blowing Function,Small Size And Light Weight
1. Introduction and application The main material of the vacuum generator is made of alumina,with strong power; small size, and light weight. It is blown by suitable for a distributed vacuum supply system under high speed dynamic compressed air and is working conditions. Quick suction-blowing, suitable for HTS series bracket, optional vacuum switch. 2. Design The main material is made of alumina.
Fast Vacuum Generator MEAC With Blowing Function,Small Size And Light Weight
1. Introduction and application
- The main material of the vacuum generator is made of alumina,with strong power; small size, and light weight. It is blown by suitable for a distributed vacuum supply system under high speed dynamic compressed air and is working conditions.
- Quick suction-blowing, suitable for HTS series bracket, optional vacuum switch.
2. Design
- The main material is made of alumina. Contains nozzles,filters, and silencers;
- Small size and light weight, especially suitable for high-speed motion conditions;
- It can be directly installed on the vacuum suction cup and connector;
3. Technical Data
| Model | Nozzle diameter | Maximum vacuum | Maximum suction force | air consumption | Operating | Recommended inner diameter of vacuum tube |
Operating
temperature
|
||
| Inhale | Blow | pressure | Compressed air pipe | vacuum tube | |||||
| [mm] | [%] | [l/min](1) | [l/min](1) | [l/min](1) | [bar] | [mm](2) | [mm](2) | [ °C] | |
| MEAC-10 | 1 | 85 | 35 | 47 | 60 | 4…6 | 4 | 4 | 0…50 |
- Note: All flow parameters refer to the parameters under the conditions of external pressure (ANR) of 101.3 kPa, temperature and humidity of 20 °C and 65% respectively.
- Note: Compressed air quality: reach ISO 8573-1, 7-4-4 level filter (40µm) with or without oil.
(1) The working pressure is 4.5 bar.
(2) Hose length: up to 2 m.
4.The suction rate under different vacuum pressure [l/min]
| Model | vacuum degree[mbar] | |||||||||
| 0 | -50 | -100 | -200 | -300 | -400 | -500 | -600 | -700 | -800 | |
| MEAC-10 | 35 | 32 | 30 | 27 | 23.5 | 18 | 12 | 8 | 4.5 | 2 |
5.The suction time to reach a specific vacuum pressure in a volume of 1L
| Model | vacuum degree[mbar] | ||||||||
| -50 | -100 | -200 | -300 | -400 | -500 | -600 | -700 | -800 | |
| MEAC-10 | 0.09 | 0.16 | 0.34 | 0.59 | 0.96 | 1.42 | 2.03 | 3.3 | 7.36 |
6.Design Data
| Model | Size[mm] | ||||||||||||
| B | B1 | B3 | d | D | G1(4) | G4(5) | H | L | L1 | L3 | X1 | Weight[g] | |
| MEAC-10 | 31 | 34.6 | 15.5 | 7.5 | 27 | G1/8-F | G1/8-F | 21.5 | 46 | 77 | 6 | 28 | 62 |
-
Note: (4) G1: The compressed air inlet is for suction. Use hose connectors with straight male threads instead of tapered threads.(5) G4: The compressed air inlet is for blowing. Use hose connectors with straight male threads instead of tapered threads.
7.Performance curve of Quick exhaust type vacuum generator MEAC
Recommended Products
Video