High Precision ISC-QY02 Automatic specimen cutting machine for micro section
Automatic specimen cutting machine for micro section Application: PCB 厂金相实验室取样用.(适用于覆铜板即没有装配元件的 PCB 板) PCB factory physical laboratory Metallurgical sample cutting (bare board) 产品特色 Machine Features: 采用红外灯定位,可以更快捷的找准取样点. This machine adopts red light positioning, and can find the sample cutting point quickly and precisely. PLC 程序设计控制 ,运行稳定,操作便捷. This machine adopts PLC control system, machine works stably and easy operating. 该取 样机采用钻铣方式,避免了样片变形,保证测试准确度. Machine adopts
Automatic specimen cutting machine for micro section
Application:
PCB 厂金相实验室取样用.(适用于覆铜板即没有装配元件的 PCB 板) PCB factory physical laboratory Metallurgical sample cutting (bare board) 产品特色 Machine Features:
- 采用红外灯定位,可以更快捷的找准取样点.
This machine adopts red light positioning, and can find the sample cutting point quickly and precisely.
- PLC 程序设计控制 ,运行稳定,操作便捷.
This machine adopts PLC control system, machine works stably and easy operating.
- 该取 样机采用钻铣方式,避免了样片变形,保证测试准确度.
Machine adopts drilling and routing principle to avoid sample deformation, in order to make sure the precision of the cutting.
- 设定好取样尺寸后自动进刀,直至切片被完全取出.
During sample cutting, when operator set the sample size, the machine will cut automatically and finish working when the micro-section is finally get out by operator.
- 可选配安全防压装置,提高安全生产.
The infrared protection device will protect operator from wrong operation damage and protect safety.
参数 Technical Parameter:
| 型号 model | ISC-QY01 | ISC-QY02 | ISC-QY03 |
| 控制方式 control mode | PLC 人机 | PLC 人机 | PLC 人机 |
| 动力 power | 2800W | 3000W | 3200W |
| 喉深 depth | 280mm | 380mm | 380mm |
|
机台尺寸 machine dimension |
宽680*深520*高1400mm | 宽 680*深 620*高 1400mm | 宽 760*深 620*高 1400mm |
|
工作台面 working deck |
天然大理石 | 天然大理石 | 天然大理石 |
| 电源 power supply | 220V 及 110V 选配 | 220V 及 110V 选配 | 220V 及 110V 选配 |
| 样品尺寸 sample size | 5*5~45*45mm | 5*5~45*45mm | 5*5~50*50mm |
|
铣刀规格 router bit spec. |
直径 Diameter 2.0~2.4mm 刀柄 3.175mm |
直径 Diameter 2.0~2.4mm 刀柄 3.175mm |
直径 Diameter 2.0~2.4mm 刀柄 3.175mm |
| 转数 rotate speed | 24000rpm | 24000rpm | 30000rpm |
|
操作系统 language |
中英文切换 Chinese/English |
中英文切换 Chinese/English |
中英文切换 Chinese/English |
|
压力方式 press power type |
气动平压式 Pneumatic flat pressure type |
气动平压式 Pneumatic flat pressure type |
气动平压式 Pneumatic flat pressure type |
| 气压 air pressure | 0.5Mpa | 0.6Mpa | 0.6Mpa |
| 机台重量 weight | 230kg | 260kg | 300kg |
|
选配 option |
安全防压装置 Safety protection device |
配安全防压装置 Safety protection device |
|
|
消耗品 consumable |
PCB 铣刀:更换周期 80PCS 左右更换一次(不同的产品洗刀寿命不同) PCB router bit: cutting 80pcs micro-section need change 1 router bit (different sample might affect the router bit life span) 粉尘袋:建议每周清洁一次,6 个月更换一个. Dust collection bag: it is recommended to clean once a week and replace one in 6 months.
|
||
Recommended Products
