PTG EXPANDING MANDREL
PTG EXPANDING MANDREL Brand:NTH Large expansion range up to 0.6mm. Double-angle principle allows for fast loading/unloading of components. Greater holding power by applying pressure evenly along the length of the sleeve. Guaranteed accuracy of 0.015mm. Standard Model 3A1 2C1 1C1 18C1 4C1 5C1 6C1 7C1 8C1 A ( Dia) Min:12.5 Max:16.0 Min:16.0 Max:22.0 Min:22.0 Max:28.5 Min:28.5 Max:41.0 Min:41.0 Max:63.5 Min:63.5 Max:76.2 Min:76.2 Max:89.0 Min:89.0 Max:130.0 Min:130.0 Max:178.0 B
PTG EXPANDING MANDREL
Brand:NTH
Large expansion range up to 0.6mm.
Double-angle principle allows for fast loading/unloading of components.
Greater holding power by applying pressure evenly along the length of the sleeve.
Guaranteed accuracy of 0.015mm.
|
Standard Model |
3A1 | 2C1 | 1C1 | 18C1 | 4C1 | 5C1 | 6C1 | 7C1 | 8C1 |
|---|---|---|---|---|---|---|---|---|---|
|
A
( Dia)
|
Min:12.5 |
Min:16.0 |
Min:22.0 |
Min:28.5 |
Min:41.0 |
Min:63.5 |
Min:76.2 |
Min:89.0 |
Min:130.0 |
| B | 60 | 66 | 72 | 79 | 84 | 109 | 118 | 133 | 153 |
| C | 20 | 20 | 20 | 20 | 20 | 25 | 25 | 30 | 30 |
| D | 22 | 27 | 32 | 38 | 43 | 51 | 57 | 63.5 | 79.5 |
| E | 14.6 | 15 | 15.5 | 15.3 | 14.8 | 25.3 | 24.7 | 25.2 | 24.6 |
| F | 20 | 22 | 30 | 31 | 36 | 36 | 37 | 47 | 22 |
| G | 40 | 40 | 40 | 40 | 40 | 60 | 60 | 100 | 100 |
| H | 75 | 75 | 75 | 75 | 75 | 120 | 120 | 180 | 180 |
| J | 11 | 15 | 20 | 26.5 | 37.5 | 55 | 74.5 | 86.5 | 124 |
| K | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| L | 12.6 | 14.1 | 20.7 | 26.3 | 37 | 57.3 | 71.1 | 84.1 | 123 |
| M(Screw) | M4 | M8 | M8 | M10 | M12 | M20 | M20 | M24 | M36 |
|
N(Screw) |
Ø58-M8 | Ø58-M8 | Ø58-M8 | Ø58-M8 | Ø58-M8 | Ø94-M10 | Ø94-M10 | Ø150-M12 | Ø150-M12 |
| R(Screw) | Ø28-M4 | Ø28-M4 | Ø58-M6 | Ø58-M6 | Ø58-M6 | Ø94-M8 | Ø94-M8 | Ø150-M10 | Ø150-M10 |
|
Pulling force(kgf)
|
700 | 1000 | 1200 | 1800 | 2300 | 2800 | 3200 | 3700 | 5500 |
|
Flush type |
3A2 | 2C2 | 1C2 | 18C2 | 4C2 | 5C2 | 6C2 | 7C2 | 8C2 |
|---|---|---|---|---|---|---|---|---|---|
| A(Dia) |
Min:16. |
Min:22.0 |
Min:28.5 |
Min:40.0 |
Min:51.0 |
Min:73.0 |
Min:89.0 |
Min:101.0 |
Min:143.0 |
| C | 20 | 20 | 20 | 20 | 20 | 25 | 25 | 30 | 30 |
| D | 26 | 32 | 38 | 45 | 50 | 60 | 69 | 78.5 | 99.5 |
| E | 14.6 | 15 | 15.5 | 15.3 | 14.8 | 25.3 | 24.7 | 25.2 | 24.6 |
| F | 20 | 22 | 30 | 31 | 36 | 36 | 37 | 47 | 22 |
| G | 40 | 40 | 40 | 40 | 40 | 60 | 60 | 100 | 100 |
| H | 75 | 75 | 75 | 75 | 75 | 120 | 120 | 180 | 180 |
| J | 11 | 15 | 20 | 26.5 | 37.5 | 55 | 74.5 | 86.5 | 124 |
| K | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| L | 12.6 | 14.1 | 20.7 | 26.3 | 37 | 57.3 | 71.1 | 84.1 | 123 |
|
M((Screw) |
M4 | M8 | M8 | M10 | M12 | M20 | M20 | M24 | M36 |
|
N(Screw) |
Ø58-M8 | Ø58-M8 | Ø58-M8 | Ø58-M8 | Ø58-M8 | Ø94-M10 | Ø94-M10 | Ø150-M12 | Ø150-M12 |
|
R(Screw) |
Ø28-M4 | Ø28-M4 | Ø58-M6 | Ø58-M6 | Ø58-M6 | Ø94-M8 | Ø94-M8 | Ø150-M10 | Ø150-M10 |
| Pulling force(kgf) | 700 | 1000 | 1200 | 1800 | 2300 | 2800 | 3200 | 3700 | 5500 |
Subject to technology changes without prior information
Non-standard requirements can be made
Recommended Products
Video
Video
Video