Low Starting Current Buck Rack & Pinion Construction Hoist Elevator
Low Starting Current Buck EN 12159:2012 Construction Hoist Elevator Construction Hoist Elevator Main Features 1) Rely on motor drive gear, rolling up and down on the gear. 2) Advanced technology at home and abroad, with novel design, reasonable structure, simple operation and easy maintenance. 3) The use of famous brands at home and abroad. 4)With perfect pre-sale, sale, and after sale service. Construction Hoist Elevator Configuration There is a electrical small crane
Low Starting Current Buck EN 12159:2012 Construction Hoist Elevator
Construction Hoist Elevator Main Features
1) Rely on motor drive gear, rolling up and down on the gear.
2) Advanced technology at home and abroad, with novel design, reasonable structure, simple operation and easy maintenance.
3) The use of famous brands at home and abroad.
4)With perfect pre-sale, sale, and after sale service.
Construction Hoist Elevator Configuration
There is a electrical small crane available to facilitate the assembly of columns and doors on the floors.
Available in single or twin hoist cage configuration.
The construction rack and pinion elevators are Variable Frequency Drive (VFD), with low starting current and much less wear and tear, very smooth starting and stopping.
Manual or Automatic Controls of the hoist is optional.
Lighting inside construction elevator car is LED ceiling lamp
The construction material hoist cage roof doors are equipped with Interlock.
Construction Hoist Elevator Optional equipment
An intelligent elevator control system, Multi-function Control System, with functions of fault detect, display and alarm, and automatic cage landing/stop and floor selector, is available.
Automatic greasing machine for rack and pinion elevator is availble.
Construction Hoist Elevator Technical data
| Item & Article No. | SC320(BZ) KP-B17, SC320/320(BZ) KP-B18 Construction Hoist Elevator |
| Payload capacity | 3,200 kg per cage |
| Lifting speed | 0–46 m/min. |
| Max. lifting height | 450 m |
| Cage width (internal) | 1.5 m |
| Cage length (internal) | 3.2 m |
| Cage height (internal) | 2.35 m |
| Drive Mode | VFD |
| Engine power | 3x15 kw per cage |
| Gearbox | Helical reducer |
| Safety device type | centrifugal brake |
| Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
| Type of mast | square column 650*650 mm with bolted rack |
| Length mast section | 1.508 m |
| Rack module | 8 |
Recommended Products
