Solid Fire Resistant Silicone Rubber High Stability Apply To O Ring Seals
Solid Silicone Rubber High Stability And Sensational Weather Resistance Used For O Ring Seals Typical Properties This RH6011 is a kind of pourable, addition-curing, two-component silicone rubber that is non-toxic and good transparency solid silicone rubber. RH6011 Properties Unit A Appearance / translucent Density g/cm3 1.195 ± 0.02 Shore A Hardness A/JLS 58-63 Tensile Strength MPa ≥ 6.0 Elongation at break % ≥ 300 Tear Strength KN/m ≥ 12 Linear Shrinkage % ≤ 0.1 Tensile set
Solid Silicone Rubber High Stability And Sensational Weather Resistance Used For O Ring Seals
Typical Properties
This RH6011 is a kind of pourable, addition-curing, two-component silicone rubber that is non-toxic and good transparency solid silicone rubber.
|
RH6011 |
|||
|
Properties |
Unit |
A |
|
|
Appearance |
/ |
translucent |
|
|
Density |
g/cm3 |
1.195 ± 0.02 |
|
|
Shore A Hardness |
A/JLS |
58-63 |
|
|
Tensile Strength |
MPa |
≥ 6.0 |
|
|
Elongation at break |
% |
≥ 300 |
|
|
Tear Strength |
KN/m |
≥ 12 |
|
|
Linear Shrinkage |
% |
≤ 0.1 |
|
|
Tensile set |
% |
≥ 7 |
|
|
Rebound |
% |
≥ 38 |
|
|
Plasticity |
% |
230-270 |
|
These figures are for reference only, please contact us for details.
Why do you choose RH6011?
-
Good transparency
-
High stability to ozone
-
UV light resistance
-
Micro-crack resistance
-
High transparence / Good transparency
-
High tear and tensile strength
-
Good rebound property
-
Excellent resistance to acid and alkali
-
Neutral odor and taste
-
Sterilizable with ethylene oxide, steam and gamma radiation
Features
| Excellent dielectric behavior over a wide range of temperatures |
| Easy pigmentable with the LSR Color Pastes |
| Outstanding optical transparency |
| High-temperature resistance |
| Outstanding resistance to aging |
| Sensational weather resistance |
Applications
Certificate
Rui-He RH6011® solid silicone rubber obtained the following test certificate: RoHS, FDA, REACH, PAHS, ISO9001:2016, etc.
Packaging & Storage
Available in 20kg cartons.
Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture.
| Trade terms | |
| Accepted Payment | T/T, L/C at sight, Western Union, Paypal, VISA, Credit Card, etc. |
| Leading time : | It takes 5-15 days after receiving the full deposit |
| Trade Term: | FOB, EXW, CIF. |
| Freight: | Ocean / Air / Courier |
Instructions
Here is a look at the LSR molding process:
1. LSR A + B components typically come in a 5-gallon pail or 55-gallon drum. A process controlled pumping kit presses down on the buckets to force the material into the static mixer and feed into the injection unit.
2. Then, streams of pigment can be added and controlled. In the injection, press material will be mixed together additionally with a screw and pushed forward to create a “shot” of material, or the amount needed to fill the mold.
3. After the material is injected into the mold, it will then stay clamped together to cure the LSR. Then, either an operator or a robot will remove the cured product from the mold and the cycle repeats. It is a very quick efficient process that typically averages 30 seconds.
Notice
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.
Recommended Products
Video
Video
Video
Video