IEC61010-1 Clause 7.4 Electrical Safety Testing Circular Stability Testing Machine

1. Introduction

The Stability Testing Machine is manufactured according to the requirements of clause 20.1 of IEC60335-1, clause 8.6.2.2 and clause 8.6.5 of IEC62368-1, clause 4.13.4 of IEC60598-1, clause 9.4.2.1 of IEC60601-1, and clause 7.4 of IEC61010-1. The circular stability testing equipment is equipped with cup-type casters. When testing, the cups are rotated down and the level can be adjusted. When moving, the cups are put away and can be pushed to other locations in the laboratory easily. The square stability testing device is specially used to test the stability of large products such as televisions. The stability testing machine can continuously adjust the angle with one hand, and can be easily adjusted to the test angle. The two major features of single-handed angle adjustment and free movement with casters are not available in other manufacturers.

2. Standard

IEC60335-1 Household and similar electrical appliances - Safety - Part 1: General requirements Clause 20.1

IEC62368-1:2018 Audio/video, information and communication technology equipment Part 1: Safety requirements Clause 8.6.2.2 and 8.6.5

IEC60598-1 Luminaires–Part 1: General requirements and tests Clause 4.13.4

IEC60601-1 Medical electrical equipment-Part 1: General requirements for basic safety and essential performance Clause 9.4.2.1

IEC61010-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Clause 7.4

3. Parameters

4. Figures