ISO6502 No Rotor Rheometer Machine For Testing Rubber
Testing Rubber Industry Used No Rotor Rheometer The main technical parameters: Model Without Rotor Rheometer Rubber Testing Machine Temperature tester Room temperature to 200°C Temperature accuracy ≤ ±0.3°C Temperature resolution 0.1°C Torque range 0-5N.M,0-10N.M,0-20N.M Torque resolution: 0.001NM Motor rotating speed 100 times / min Rotor range Adopt 4 setting: 25, 50, 100, 200lbs per inch Die cavity frequency 1.7Hz Sway angle ±0.5°, ±1°, ±3° Air compression 0.5Mpa--0.65MPa
Testing Rubber Industry Used No Rotor Rheometer
The main technical parameters:
| Model | Without Rotor Rheometer Rubber Testing Machine |
| Temperature tester | Room temperature to 200°C |
| Temperature accuracy | ≤ ±0.3°C |
| Temperature resolution | 0.1°C |
| Torque range | 0-5N.M,0-10N.M,0-20N.M |
| Torque resolution: | 0.001NM |
| Motor rotating speed | 100 times / min |
| Rotor range | Adopt 4 setting: 25, 50, 100, 200lbs per inch |
| Die cavity frequency | 1.7Hz |
| Sway angle | ±0.5°, ±1°, ±3° |
| Air compression | 0.5Mpa--0.65MPa |
| Ambient temperature | 0-35°C |
| Test result |
Printing:date,time,temperature,vulcanization curve,temperature curve,ML,MH,ts1,ts2,t10,t50,Vc1,Vc2. |
| Dimension | 131*56*62cm |
| Power | Single phase, 220V±10%, 50Hz |
| Display | Windows 7 + software |
| Weight |
250kg |
Summary:
The use of single-chip control, including: host, temperature measurement, temperature control, data acquisition and processing, sensors and electrical interlocking and other components. The measurement and temperature control circuit consists of a temperature controller, a platinum resistor, and a heater. It can automatically track changes in the power grid and ambient temperature, automatically correct PID parameters, and achieve rapid and accurate temperature control. The data acquisition system and the electromechanical chain complete the automatic detection of the torque signal of the rubber vulcanization process, automatic real-time display of temperature and set values. After vulcanization is completed, automatic processing, automatic calculation, printing vulcanization curve and process parameters. Show vulcanization time, sulfurizing power torch.
Corresponding standard:
Accord with GB/T16584”rubber- no rotor rheometer to measure the characteristics of vulcanized”ISO6502:1991 and ASTMD5289-95
Download Brief:
The No Rotor Rheometer is the most widely used instrument in the rubber processing industry to control rubber quality, rapid inspection and basic rubber research. It provides accurate data for the optimal rubber formula combination, and can accurately measure the scorch time, positive vulcanizer time, and vulcanization. Index and parameters such as maximum and minimum torque.
Recommended Products
Video
Video
Video
Video
Video