Square Complementary Pnp Proximity Sensor , 50mm Waterproof Proximity Sensor
P+F NCN50 Series Proximity Sensor Switch PNP Complementary Sensor 50mm Proximity Switch Application Specific Inductive Sensor features: Analog output models with 4-20 mA output signal Integrated speed monitor with up to 100 Hz operation Pressure resistant cylinder sensors for up to 500 bar Sensors approved for gas and dust Ex zones Models with stainless steel sensing face Protective class of up to IP68/ IP69k (submersible/ high pressure water jet resistant) Weld resistant
Place of Origin
Germany
Packaging Details
P+F original package
Model Number
NCN50 Series
Supply Ability
10-500 Pcs/month
Certification
CE,UL
Operating voltage
10 to 60 V
Product Description
P+F NCN50 Series Proximity Sensor Switch PNP Complementary Sensor 50mm Proximity Switch
Application Specific Inductive Sensor features:
- Analog output models with 4-20 mA output signal
- Integrated speed monitor with up to 100 Hz operation
- Pressure resistant cylinder sensors for up to 500 bar
- Sensors approved for gas and dust Ex zones
- Models with stainless steel sensing face
- Protective class of up to IP68/ IP69k (submersible/ high pressure water jet resistant)
- Weld resistant designs with PTFE-coated surface
- Reduction factor of 1, all metals sensed at same distance
- Exclusive ferrous and non-ferrous detection models
- Safety function sensors
- Extended temperature range: -40 °C up to +250 °C
Datasheet Of NCN50-FP-A2-P1 Proximity Sensor Switch
| General specifications | ||
|---|---|---|
| Switching function | complementary | |
| Output type | PNP | |
| Rated operating distance | 50 mm | |
| Installation | non-flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 40.5 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.85 | |
| Output type | 4-wire | |
| Nominal ratings | ||
| Operating voltage | 10 ... 60 V | |
| Switching frequency | 0 ... 80 Hz | |
| Hysteresis | typ. 3 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 3 V | |
| Operating current | 0 ... 200 mA | |
| Off-state current | 0 ... 0.5 mA | |
| No-load supply current | ≤ 20 mA | |
| Time delay before availability | ≤ 300 ms | |
| Operating voltage indicator | LED, green | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 671 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
|
| Approvals and certificates | ||
| EAC conformity | TR CU 020/2011 | |
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | Certified by China Compulsory Certification (CCC) | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | screw terminals | |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
|
| Core cross-section | up to 2.5 mm2 | |
| Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
| Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
| Housing material | PBT | |
| Sensing face | PBT | |
| Housing base | PBT | |
| Degree of protection | IP68 | |
| Mass | 410 g | |
Recommended Products
Price: consult for best discount
Price: consult for best discount
Price: consult for best discount
Price: consult for best discount
Price: consult for best discount
Price: consult for best discount
Price: consult for best discount
Price: consult for best discount
Interested in this product?
Contact us now for more details and a custom quote.