High temperature spring fatigue testing machine iqualitrol iGX-656
High Temperature Spring Fatigue Testing Machine iqualitrol iGX-656 Brief Introduction: The iqualitrol High temperature spring fatigue testing machine iGX-656 is designed to perform a comprehensive life test of compression and torsion springs in a high-temperature oven, and to perform a reciprocating fatigue test at a certain temperature, speed, and stroke. It is made of variable frequency motors, imported accessories, bearings, linear sliders, and adopts an upper and lower
High Temperature Spring Fatigue Testing Machine iqualitrol iGX-656
Brief Introduction:
The iqualitrol High temperature spring fatigue testing machine iGX-656 is designed to perform a comprehensive life test of compression and torsion springs in a high-temperature oven, and to perform a reciprocating fatigue test at a certain temperature, speed, and stroke.
It is made of variable frequency motors, imported accessories, bearings, linear sliders, and adopts an upper and lower integrated structure.
Technical Specifications:
| Internal Dimension | 600×500×600mm, (Width * Height * Depth) |
| Temperature range | RT+10℃～+200℃ |
| Heating rate | Room temperature to 100℃, within 10 minutes |
| Temperature fluctuation | ≤±2℃ |
| Temperature distribution error | ±2℃ |
| Temperature Control Accuracy | ±0.5℃ |
| Outer Material | Cold rolled powder paint |
| Inside Material | Stainless Steel |
| Insulation material | Aluminum silicate |
| Wind path structure | Centrifugal fan (Note: A fan cooling device must be installed above 400℃) |
| Door | Single door |
| Viewing Window | Tempered glass observation window (Note: no observation window above 300℃) |
| Ventilation holes and pipes | Exhaust hole, air intake hole |
| Temperature control method | Button controller |
| Shelf | 2 shelves, stainless steel |
| Power | Total 5KW |
| Heating system | Built-in nickel-chromium alloy heater, no pollution and long service life; completely independent system, no impact on control circuit |
Spring Performance Index:
| Test station |
2 stations, can test 10 groups at the same time |
| Test samples | compression spring, torsion spring |
| Maximum compression spring size | within 30mm outer diameter, can withstand a total capacity of 1000N |
| Maximum torsion spring size | within 100mm outer diameter, can withstand a total capacity of 50N.M |
| Torsion spring torsion angle | 0-180° |
| Test stroke | 0-30mm |
| Adjustment stroke | 0-150mm |
| Speed | 0-1000 times/min, can be set by PLC programming |
| Test number range | 1-99999999 times, can be set by PLC programming |
| Operation mode | touch screen control |
| Control mode | PLC program |
| Power supply | AC220V/50Hz |
Recommended Products
