Car Profile Roll Forming Machine

1.1 Machine cover an area of 1.1:35 * 3.5 * 5 meters (length x width x height).

1.2 Devices feed direction: to be determined.

1.3 Voltage parameters of 380, 50 Hz, 3 phase.

1.4 Hydraulic oil: 46 # hydraulic oil.

1.5 Gear oil: 18 # hyperbolic gear oil.

2 Machine main technical parameters:

2.1 Width: 570 mm or less

2.2 Thickness: 3 ~ 4 mm

2.3 Material: low carbon steel, etc

2.4 Length: 4000 mm

2.5 Machine installed gross capacity: 79 kw.

3. Forming Part:

(1). Velocity: 0 ~ 10 m/min.

(2). Molding time: 22 time/min

(3). Memorial arch for slider QT450 castings for casting (HT300) casting forming, annealing, rough machining, finish machining.

(4). Diameter of axle: Φ 95 mm. Material: 45 # steel

       Processing: rough machining to tempering treatment, finish machining

(5). Forming roll: material GCr15 steel heat treatment: HRC58 ~ 62 °

       Processing: rough machining, heat treatment and finish machining

(6). Transmission way, 200 gearbox shaft driving. Front-rear 3 groups and gear drive, stable transmission, high precision molding.

(7). Motor, power 30 kw motor 1 650 deceleration machine

(8). The fuselage part is the main body of the mill, as the channel steel welded with 35 mm plate CNC machining, beautiful and firm base installation adjusting bolt, used to adjust the fuselage level, base mounting hole for hoist, installation convenient transportation.