Dynamic Pendulum Charpy Impact Testing Machine For Plastic Pvc Pipe
Factory Price Dynamic Pendulum Impact Tester Charpy Impact Testing Machine For Plastic PVC Pipe Ⅰ. Use: It can be used to determine the impact strength of thermoplastic pipes for fluid delivery. Suitable for homopolymeric and co-poly polypropylene (PP-H,PP-B,PP-R) tubes, unplastic PVC (PVC-U) tubes, modified high impulse resistant PVC (PVC-Hi) tubes, modified polyvinyl chloride (PVC-C) tubes, acrylonitrile-butadiene-styrene and acrylonitrile-styrene-acrylic (ABS, ASA) tubes.
Factory Price Dynamic Pendulum Impact Tester Charpy Impact Testing Machine For Plastic PVC Pipe
Ⅰ. Use:
It can be used to determine the impact strength of thermoplastic pipes for fluid delivery. Suitable for homopolymeric and co-poly polypropylene (PP-H,PP-B,PP-R) tubes, unplastic PVC (PVC-U) tubes, modified high impulse resistant PVC (PVC-Hi) tubes, modified polyvinyl chloride (PVC-C) tubes, acrylonitrile-butadiene-styrene and acrylonitrile-styrene-acrylic (ABS, ASA) tubes.
Ⅱ. Principle:
A small section of pipe or machined gap-free strip specimen was preprocessed at the specified test temperature.The sample is then supported in the horizontal direction, with a quick impact at the support line with a swing hammer with a given impact energy.After an impact on the specified number of samples, the test results are identified as the percentage of the number of sample damages against the total number of samples tested.
Ⅲ. Technical Parameters
| Model | XJJ-50J |
| Impact speed | 3.8m/s |
| Impact energy | 15J, 50J |
| Pendulum moment | Pd15=7.733Nm, Pd50=25.777Nm |
| Rising angle | 160° |
| Impact blade angle | 30°±1° |
| End arc radius | (2±0.5)mm |
| Distance between centers of pendulum and specimen | 380mm |
| Grip round edge radius | (1 ± 0.1)mm |
| Impact blade corner dimensions | (30 ± 1)° |
| Impact blade round edge radius | (2 ± 0.5)mm |
| Display | The dial shows |
| Standards | ISO9854,ISO180,GB/T1043,JB/T8761 |
Ⅳ. Configuration List
| No | Item | Quantity |
| 1 | Main frame | 1 set |
| 2 | 15J pendulum weight | 1 set |
| 3 | 50J pendulum weight | 1 set |
| 4 | Centering plate(span 40,70) | 2 sets |
| 5 | Inner hexagon spanner(s=5,8) | Each 1 set |
| 9 | Operation manual | 1 set |
| 10 | Warranty card | 1 set |
| 11 | Packing list | 1 set |
Recommended Products
