Solar Rack Angle Shape Automatic Roll Forming Machine Stiffen Channel
Solar Rack Angle Shape Automatic Roll Forming Machine Stiffen Channel Machine components list: Name NO. Unit 1. De-coiler 1 set 2. Forming machine 1 set 3. Punching device 1 set 4. Cutting device 1 set 5. PLC control box 1 set 6. Hydraulic pump station 1 set 7. Production support table 1 set Techincal description: 3T manual decoiler: Width of feeding: 500mm Capability: 3 Ton Bound of expand &fight: 420mm—510mm Mode of expand &fight: inner expand &fight by manual Way of
Solar Rack Angle Shape Automatic Roll Forming Machine Stiffen Channel
Machine components list:
| Name | NO. | Unit |
| 1. De-coiler | 1 | set |
| 2. Forming machine | 1 | set |
| 3. Punching device | 1 | set |
| 4. Cutting device | 1 | set |
| 5. PLC control box | 1 | set |
| 6. Hydraulic pump station | 1 | set |
| 7. Production support table | 1 | set |
Techincal description:
3T manual decoiler:
Width of feeding: 500mm
Capability: 3 Ton
Bound of expand &fight: 420mm—510mm
Mode of expand &fight: inner expand &fight by manual
Way of feeding: manual
Forming section
Profile steel thickness: 0.4-0.7mm GI sheet
Main motor power:4kw, AC motor, side motor to save space (Brand: Guomao which made in China)
Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
Roll station: about 8stations +1 station of rectify (according the final design)
Roller material:SAE1045, hardness and chrome plated surface
Shaft diameter: ￠56mm material: SAE1045
Machine roll forming speed:0-15m/min (not including punching and cutting time)
Machine base frame adopt H beam welding steel
Machine structure: adopt wall panel which is much stronger
Post cutting :
Cutting after forming: Cut the sheet after roll forming to required length
Uses one hydraulic cylinder for operation shall include a flow regulator to achieve a uniform lowering knife.
Material of blade: Cr12, 58-62 HRC hardness
Cutting power by hydraulic, 3KW
Working pressure: 12Mpa adjustable
Length measuring: Automatic encoder length measuring, brand: Omron
The cutting sequence is also contained and controlled by the same PLC program
Tolerance of length: +/- 1.5mm for each piece end product
Hydraulic power: 3kw
Working pressure: 12Mp adjustable
Solenoid valve: 1 group
Hydraulic oil: 46# hydraulic oil
Quantity : 1
Control system
2) Automatic stopping of the equipment after completion of the cutting programme.
5) PLC brand:
| Working conditions | |
| 1. Machine size | 8.5m x 1.8m (L XW) |
| 2. Working size | 16.5m x 3.5m (LXW) |
| 3. Power supply | 16.5kw |
| 4. Frequency | 50-60HZ |
| 5. Wires/cables | 4-6mm²(length according to workshop) |
| 6. Labor cost | 2 workers |
| 7. Tools | Spanners and screwdriver |
| 8. Lift device | 5t forklift or crane |
① If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.
② Without visiting, we will send you user manual and video to teach you to install and operate.
③ If buyer needs our technician to go to your local factory,please arrange board and lodging and other necessary things.
Machine Photo
Recommended Products
