Customization Marine Winch Accessories Bracket Drive rustproof
Marine Crane Accessories Bracket - Drive Support Can Be Customized Product name:Marine Crane Accessories Bracket - Drive Support Can Be Customized Other name:Marine Winch bracket-drive. Standard:NS-ISO 13920BF Sling type:cable or wire power: Electirc colour : Blue white Rope: 100-1000mm Rope diameter: 3-199mm Tolerance General: NS-ISO 13920BF Structural composition Q/TY ITEM DESCRIPTION TECHNICAL DESCRIPTION MATERIAL MASS 1 1 Plate PL30 S355J2+N 146.68KG 2 2 Plate PL25 S355J2
Marine Crane Accessories Bracket - Drive Support Can Be Customized
Product name:Marine Crane Accessories Bracket - Drive Support Can Be Customized
Other name:Marine Winch bracket-drive.
Standard:NS-ISO 13920BF
Sling type:cable or wire
power: Electirc
colour : Blue white
Rope: 100-1000mm
Rope diameter: 3-199mm
Tolerance General: NS-ISO 13920BF
Structural composition
| Q/TY | ITEM | DESCRIPTION | TECHNICAL DESCRIPTION | MATERIAL | MASS | |
| 1 | 1 | Plate | PL30 | S355J2+N | 146.68KG | |
| 2 | 2 | Plate | PL25 | S355J2+N | 11.23KG | |
| 1 | 3 | Plate | PL25 | S355J2+N | 18.63KG | |
| 1 | 4 | Plate | PL20 | S355J2+N | 18.63KG | |
| 2 | 5 | Plate | PL20 | S355J2+N | 4.25KG | |
| 1 | 6 | Tube square | w300* H300 *T12 *L1250 | S355J2H | 26.26KG | |
Preparation and cutting of steel
Cutting and beveling of materials shall be carried out by thermal cutting or machining.
Thermally cut edges shall be ground to sound metal before welding.
All sharp edges, corners and Curing Zone must be rounded to R=2.5mm.
Stainless steel shall by ground, and then acid treated and cleaned before use.
Welding requirement
No parts shall be let un-welded unless clearly tsated on the drawing ,For efiocient and easy access it is recommended that sharp edges (that are not to be welded)are rounded to minimum R2.5 before assembling parts.
Finishing requirement
To ensure sufficient adhession for surface treatment all sarp edges shall be rounded to minimum R2.5, welding spatter beadsd and slag shall be completely removed ,Damage in surfaces shall be filed and grinded flush, negative thickness measurements are prohibited
Recommended Products
