ASTM D1895 Apparent Density Tester, Bulk Density Meter Method A for Plastic

ASTM D1895 Apparent Density Tester , Bulk Density Meter Method A for Plastic

DF-1-06 can be used to measure the apparent density,bulk factor,and pourability of plastic materials.This instrument is produced in accordance with the method A of standard of ASTM D1895.As for the apparent density,DF-1-06 is more suitable for fine granule and powder.also can be poured readily through a small funnel.

Application:

This instrument is applicable to measure the plastic materials in the form of fine granule and powder.

Standard Accessories:

Holder,funnel,measuring cup,height pad,scraper blade,striker plate,tool and sample spoon.

Standards:

ASTM D1895,ISO60

Procedure:

Close the small end of the funnel with the hand or with a suitable flat strip and pour a 115±5cm³ sample into the funnel.Open the bottom of the funnel quickly and allow the material to flow freely into the cup.If caking occurs in the funnel,the material may be loosened with a small glass rod.After all the material has passed through the funnel.immediately scrape off the excess on the top of the cup with a straightedge without shaking the cup.Weigh the material in the cup to the nearest 0.1g.Calculate the weight in grams of 1cm³ of the material.

Specification:

►Packing