Consumer Electronic Computer Hardware & Software Other Networking Devices

SMF Cable SFP+ Transceiver Module 80km Ch26 LC Dulplex For Cisco Switch

Name: SMF Cable SFP+ Transceiver Module 80km Ch26 LC Dulplex For Cisco Switch
Brand: Shenzhen HiLink Technology Co.,Ltd.

SMF Cable SFP+ Transceiver Module 80km Ch26 LC Dulplex For Cisco Switch Features Duplex LC Connector Support hot-pluggable Metal with lower EMI Excellent ESD protection C-band DWDM 100GHz channel spacing EML Transmitter and APD Receiver Max link length up to 80Km on SMF RoHS Compliant and Lead-Free Digital diagnostic compatible with SFF-8472 Case Operation Temperature£ºStandard temperature: -5℃~+70℃ Single 3.3V power supply and Low power dissipation Regulatory Compliance

Cable Type SMF

Place of Origin Guangdong, China

Packaging Details Blister Packaging, 10pcs/ tray

Model Number DW-SFP+-80-CH26

Supply Ability 100pcs/ week

Certification CE FCC Rohs

toyota lc 200 battery pack for speedlite honda starter switch

Product Description

SMF Cable SFP+ Transceiver Module 80km Ch26 LC Dulplex For Cisco Switch

Features
Duplex LC Connector
Support hot-pluggable
Metal with lower EMI
Excellent ESD protection
C-band DWDM 100GHz channel spacing
EML Transmitter and APD Receiver
Max link length up to 80Km on SMF
RoHS Compliant and Lead-Free
Digital diagnostic compatible with SFF-8472
Case Operation Temperature£ºStandard temperature: -5℃~+70℃
Single 3.3V power supply and Low power dissipation

Regulatory Compliance

Compliant with SFP+ MSA: SFF-8431 Rev4.1
Compliant with SFF-8472 Rev9.5
Compliant with IEEE802.3-2008
ESD to the Electrical PINs: compatible with MIL-STD-883E Method 3015.7
ESD to the Duplex LC Receptacle: compatible with IEC 61000-4-2 GR-1089-CORE
Immunity compatible with IEC 61000-4-3
EMI compatible with FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI
Class B
Laser Eye Safety compatible with FDA 21CFR 1040.10 and 1040.11 EN60950, EN
(IEC) 60825-1,2
RoHS compliant with 2002/95/EC 4.1&4.2 2005/747/EC

Spectral Attenuation Measurement

WDM systems are divided into different wavelength patterns, conventional/coarse (CWDM) and dense (DWDM). Conventional WDM systems provide up to 8 channels in the 3rd transmission window (C-Band) of silica fibers around 1550nm.

Dense wavelength division multiplexing (DWDM) uses the same transmission window but with denser channel spacing. Channel plans vary, but a typical system would use 40 channels at 100 GHz spacing or 80 channels with 50 GHz spacing.

Dense wavelength division multiplexing (DWDM) refers originally to optical signals multiplexed within the 1550nm band so as to leverage the capabilities (and cost) of erbium doped fiber amplifiers (EDFAs), which are effective for wavelengths between approximately 1525–1565nm (C band), or 1570–1610nm (L band).