YD - 5 semi-automatic blow moulding machine
Specifications 1.For 3-5 gallon PET bottles 2.FESTO components 3.Inner heating 4.CE, ISO certification Brief introduction: semi-automatic blow moulding machine, has been improved on the basis of its pre-model.It is designed according to CE standard, by adding safe door, the machine is safer and easier to operate, also the machine looks neat and nice. The main technical parameters: General information YD—5FOR 5GALLON Clamping force 22T Clamping stroke 450mm Max.stretching
Specifications
1.For 3-5 gallon PET bottles
2.FESTO components
3.Inner heating
4.CE, ISO certification
Brief introduction:
semi-automatic blow moulding machine, has been improved on the basis of its pre-model.It is designed according to CE standard, by adding safe door, the machine is safer and easier to operate, also the machine looks neat and nice.
The main technical parameters:
|
General information |
YD—5FOR 5GALLON |
|
Clamping force |
22T |
|
Clamping stroke |
450mm |
|
Max.stretching stroke |
660mm |
|
Number of cavities |
7-22l 1 cavity |
|
Theorectical output |
7-22l 1 cavity:90bph |
|
Max.mould thickness |
400mm |
|
Mould plate size |
600*640mm |
|
Voltage standard |
380v/3hp/50hz |
|
Total power |
10-25kw |
|
Min air compressor |
1.6m/min 3.0mpa |
|
Blow molding machine |
210*73*190cm |
|
Pre-heater |
262*66*160cm |
|
Net weight |
2.5t |
|
Container volume |
7-22l |
|
Neck diameter range |
50-330mm |
|
Container diamerer |
400mm |
|
Container height |
640mm |
Recommended Products
