Silk Screen Polyurethane Squeegee/ Screen Printing Squeegee/Squeegee
Silk Screen Polyurethane Squeegee/ Screen Printing Squeegee/Squeegee Hardness Selections Red, Soft PU1-PU4 Suitable for low viscosity ink printing, low density or tough surface printing. Green, Medium PU5-PU6 High pressure resistance. Suitable for high or low viscosity ink or high density surface printing. Could easily control the ink amount and assure the precision of the printing. Blue, Hard PU7-PU10 Highest pressure and strongest ink solvent resistance. Could easily
Silk Screen Polyurethane Squeegee/ Screen Printing Squeegee/Squeegee
Hardness Selections
| Red, Soft PU1-PU4 |
Suitable for low viscosity ink printing, low density or tough surface printing. |
| Green, Medium PU5-PU6 |
High pressure resistance. Suitable for high or low viscosity ink or high density surface printing. Could easily control the ink amount and assure the precision of the printing. |
| Blue, Hard PU7-PU10 |
Highest pressure and strongest ink solvent resistance. Could easily control the ink amount and get the highest quality printing. |
Squeegee blade:
Water resistance and strong durability in Aluminum Handle, commonly used in manual screen printing. 4inch-51inch.
Features:
Our squeegee made of special polyurethane elastomer have the following advantages.
Excellent resistance and minimum swell to a wide range of pastes,inlss and solvents.
Precisely finished edge.
Huper solvent resistance.
Squeegee for Screen Printing Specification:
| Material | TDI, MDI, PPG, PTMG,PUetc. |
| Color | as requested |
| Hardness | 50-95(Shore A) |
| Density | 1.12-1.25g/cm3 |
| Tensile Strength | 25-55Mpa |
| Tear Strength | 85-155KN/M |
| Elongation | 450-650% |
| Impact Elasticity | >20-30% |
| Tolerance | 0.1-0.3mm |
| Working Temperature | 120°C(max) |
| Surface Finish | One side or both |
Mob/WhatsApp/wechat:86-18117348869
Email: [email protected]
Skype: springmesh
Recommended Products
