C9200-48T-E Overview
C9200-48T-E is the Catalyst 9200 48-port Data Switch, withNetwork Essentials software. Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments.
![]()
![]()
C9200-48T-E Specification
Series
Catalyst 9200 Series
Product Type
Fixed Configuration Switch
License Level
Essentials (E)
Chassis Dimensions (H×W×D, Base Unit)
1.73 × 17.5 × 13.8 in (4.4 × 44.5 × 35.0 cm)
Chassis Dimensions (With FEP/Fan)
1.73 × 17.5 × 15.4 in (4.4 × 44.5 × 39.1 cm)
Fixed Ports
48 × 10/100/1000BASE-T (RJ45)
Uplink Ports
4 × 1G SFP (included with C9200-NM-4X1G module)
Uplink Options
Optional 4 × 1G SFP or 4 × 10G SFP+ via network modules
Switching Capacity
96 Gbps
Buffer Memory
16 MB shared
MAC Address Table
32,000 entries
VLAN Support
4,096 active VLANs, 1,500 STP instances
Power Supply
125W AC (PWR-C5-125WAC or PWR-C6-125WAC)
Input Voltage
100–240V AC, 50/60Hz
MTBF
571,440 hours (~65 years)
Redundancy
Hot-swappable fan tray, optional 1+1 power supply redundancy
Licensing
Essentials (pre-installed)
Minimum IOS-XE Version
16.12.1
Layer 3 Routing
Static, RIPv1/v2, OSPF, EIGRP, limited BGP support
Security
ACLs (32,000 hardware entries), 802.1X, DHCP snooping
Operating Temperature
Standard: 32°F to 104°F (0°C to 40°C); Short-term: -5°C to 50°C (up to 96 hours/year)
Humidity
5% to 90% non-condensing
Altitude
Up to 10,000 ft (3,000 m)
Noise Level (25°C ambient)
LpA: 42 dB typical, 45 dB max; LwA: 5.3 B typical, 5.6 B max
Management Interfaces
1 × RJ45 console (10/100), 1 × RJ45 management (10/100)
Management Protocols
SNMPv1/2c/3, SSHv1/v2, NETCONF/YANG
Compliance
Safety: UL 60950-1, EN 62368-1; EMC: FCC Part 15 Class A, EN 55032; RoHS compliant
Power Consumption (No PoE, 115V AC)
Idle: 36.57 W; 50% Traffic: 45.63 W; 100% Traffic: 55.87 W
Power Consumption (No PoE, 230V AC)
Idle: 36.99 W; 50% Traffic: 45.71 W; 100% Traffic: 55.04 W
![]()