China High Precision Ceramic Single Crystal Composite Wafer for NDT Sensor Application for sale

High Precision Ceramic Single Crystal Composite Wafer for NDT Sensor Application

Name: High Precision Ceramic Single Crystal Composite Wafer for NDT Sensor Application
Brand: HUATEC GROUP CORPORATION

High Precision Ceramic Single Crystal Composite Wafer for NDT Sensor Application Performance Features High sensitivity High bandwidth Low acoustic impedance Good matching with water / human tissue / tested medium Low ringing time High signal-to-noise ratio 1 Type 1-3 ceramic composite wafers Example: Frequency MHz/ Length × width mm Overall dimensions Wafer length L(mm) 　 Default tolerance±0.05mm Note: The single crystal composite frequency is 5-10 MHZ, and the ceramic

Composite method Type 1-3 composite

Place of Origin China

Packaging Details Outer carton packaging

ceramic composite frequency 0.5-15 MHZ

Base material model PZ44

Supply Ability 10 Sets/Month

swimsuit high waist bikini bottom high waist investor looking for investment

Product Description

High Precision Ceramic Single Crystal Composite Wafer for NDT Sensor Application

Performance Features

High sensitivity
High bandwidth
Low acoustic impedance
Good matching with water / human tissue / tested medium
Low ringing time
High signal-to-noise ratio

1	Type 1-3 ceramic composite wafers	Example: Frequency MHz/ Length × width mm
Overall dimensions
Wafer length L(mm)			Default tolerance±0.05mm	Note: The single crystal composite frequency is 5-10 MHZ, and the ceramic composite frequency is 0.5-15 MHZ. Other frequencies require technical confirmation
Wafer width W(mm)			Default tolerance±0.05mm
Wafer thickness H(mm)/ wafer frequency(MHz)			Default tolerance for thickness±0.005mm
pitch(mm)	(The size of the small crystal column is added with a knife slit)		It would be best if the customer could provide it. Some Osos have default Settings
Knife slit(mm)
Performance parameters
Composite method	Type 1-3 composite
Base material model	PZ44
Process requirements
Does the electrode need to be edge-wrapped	When edge banding is required, chamfering will be done by default. The drawings provided by the customer are attached
Is an isolation slot needed	When an isolation tank is required, the customer shall provide the drawings (including dimensions and polarity) as attached
Coating requirements	PVD:Gilding
Whether polarization is needed	Default polarization
Whether the positive and negative poles are marked	By default, the red marker dot is the positive pole
Other special requirements	Please describe it in detail if necessary
Test report
ULSO LOGO report	√
Logo-free report
Packaging requirements
Independent packaging	√
Not packaged independently