Electronic Components Identification Nljd Detector Security Checking Equipment

Name: Electronic Components Identification Nljd Detector Security Checking Equipment
Brand: Beijing Heweiyongtai Sci & Tech Co., Ltd.

Continuous wave mode 1.3 hours Non-Linear Junction Detector Introduction The non-linear Junction Detector HW-24 is used to search and locate electronic devices in on or off state. When a radio frequency signal is detected, the non-linear junction detector generates second and third harmonics.Semiconductor components will display higher grades on the 2nd harmonic.Corrosive semiconductor components will display higher grades on the 3rd harmonic.The non linear junction detector

Battery parameters 3.7V 7800mah

Place of Origin China

Detection range Normal power: 0.15 m; maximum power: 0.4 m

Packaging Details Carton package

Model Number HW-24

Supply Ability 300 sets per month

electronic repair microscope heavy duty gym equipment bike washing equipment

Product Description

Continuous wave mode 1.3 hours Non-Linear Junction Detector

Introduction

The non-linear Junction Detector HW-24 is used to search and locate electronic devices in on or off state. When a radio frequency signal is detected, the non-linear junction detector generates second and third harmonics.Semiconductor components will display higher grades on the 2nd harmonic.Corrosive semiconductor components will display higher grades on the 3rd harmonic.The non linear junction detector analyzes the 2nd and 3rd harmonics reflected from the target to ensure the rapid and reliable identification of electronic components and corrosive semiconductors.

Features

1. The detector is easy to operate, it is an ideal security tool. Modulation mode: pulse wave, continuous wave, to ensure a wide range of detection and reliable analysis of electronic devices. Automatic control of output power makes operation very simple.

Automatic adjustment of detection emission power.The non-linear junction detector can automatically adjust the optimal reception frequency to avoid interference from external noise, thus ensuring good results in complex geomagnetic environment.

Specification

Sensitivity	Not less than -120dbm
Modulation mode:	Pulse signal, continuous wave signal;
Output power	Pulse mode:15W; Continuous wave mode : 4W;
Display panel	Display 2nd and 3rd harmonics and sensitivity;
Volume	Volume can be adjusted and can be connected to external headphones
Detection range	Normal power: 0.15 m; maximum power: 0.4 m;
False alarm rate	≤5%
Signal frequency	2400 - 2483 MHz
Working time	Pulse mode: 5 hours, Continuous wave mode: 1.3 hours;
Battery parameters	3.7V 7800mah;
Charger parameters	Input AC100-240V, Output DC 4.2V 3A;
Host size	Length 470mm unfolded, 285mm folded;Width of 128 mm;
Working environment	humidity ≤90%;Temperature -5 ° C to 50 ° C
Weight	less than 1000 g