Multi Function Sandwich Panel Making Machine With Double Drive Double Roller Extruding tech
Multi Function Sandwich Panel Making Machine With Double Drive Double Roller Extruding tech eco-friendly Mgo sandwich wall panel forming machine With 2000 SQM larger capacity Item National Standards Testing Indexes 90mm 90mm 1 Anti-impact Capacity ≥5 ≥10 2 Anti-bending damage load ≥1.5 ≥4 3 Compressive strength/Mpa ≥3.5 ≥5 4 Softening coefficient ≥0.80 ≥1 5 Facial surface density g/cubic meters ≤90 ≤70 6 Water absorption ≤10 ≤9 7 Drying shrinkage% ≤0.6 ≤0.5 8 Hanging force/N
Multi Function Sandwich Panel Making Machine With Double Drive Double Roller Extruding tech
eco-friendly Mgo sandwich wall panel forming machine With 2000 SQM larger capacity
|
|
Item | National Standards | Testing Indexes |
| 90mm | 90mm | ||
| 1 | Anti-impact Capacity | ≥5 | ≥10 |
| 2 | Anti-bending damage load | ≥1.5 | ≥4 |
| 3 | Compressive strength/Mpa | ≥3.5 | ≥5 |
| 4 | Softening coefficient | ≥0.80 | ≥1 |
| 5 | Facial surface density g/cubic meters | ≤90 | ≤70 |
| 6 | Water absorption | ≤10 | ≤9 |
| 7 | Drying shrinkage% | ≤0.6 | ≤0.5 |
| 8 | Hanging force/N | ≥1000 | ≥1500 |
| 9 | Sound insulation/dB | ≥35 | ≥50 |
| 10 | Fireproof limit/h | ≥1 | ≥3 |
| 11 | Heat transfer coefficient w/m2 | ≤1.0 | ≤1.0 |
| 12 | Radioactivity limit | ≤1.0 | ≤1.0 |
| 13 | IRa(interior radiation indexes) | ≤1.0 | ≤1.0 |
| 14 | lr(exterior radiation indexes) | ≤1.0 | ≤1.0 |
Raw material and cost analysis
The product is formed with crushed crop straw or sawdust and some inorganic
chemical materials at one time after roller-extruding. The source of raw materials is widely and they are purchased
easily for customers.
Take specification of 1.22mX2.44mX3mm as example, the cost is 7~8 Yuan,
and the market price is generally 13~16 Yuan.
This whole production line can used to produce MGO door board, MGO board, Sanding mgo board, MGO foam board, fireproof board, cement board, EPS sandwich wall panel, lightweight wall panel.
It is the multi-functional production line for many kinds of modern construction materials, is well received by clients who focus on green environment-friendly buildings and energy-saving constructions.
I Equipment Feature
This machine adopts the technology of double-drive double-roller-extruding, and the product is formed once after sizing, material feeding, spreading no-woven cloth, compounding and repressing. The equipment runs stably with high automatic degree, and the specification of its product can be adjusted arbitrarily. The equipment actually realizes the industrial production-line of new model building wall board, and the product have even and glazed surface with high compactness. The equipment largely reduces the labor intensity of worker and thoroughly changes many shortages of the former casting forming with upright mould or flat mould, such as large mould usage, low recycling rate, required electrical heating or steam heating, single kind of product as well as the sound insulation and heat-preserving which don’t meet the market requirements.
II Project Feature
1. The source of the production raw materials is widely with no regional restriction. The product is made of sawdust, straw (rice hulls), many kinds of crop straw and inorganic material (such as talcum powder, infusorial earth and powder coal ash) after special technology. So this project have low production cost, small investment and fast effectiveness.
2. The equipment has high automatic degree, simple production technology, low labor intensity and production line, and there is no noise and three-wastes (waste water, waste gas and waste residue) during production.
3. Low production energy consumption. With the influence of chemical reaction, it can meet the requirements about production technology without high temperature and high pressure.
Product Feature and Performance
Performance
Production Conditions
Wall board production line has workshop and raw material warehouse. Workshop: over
300m2-800 m2, worker: 10-16 person; fresh water; electricity:8-20KW
5. Benefit Analysis
(I) Cost accounting
Raw material: 19-25 Yuan/ m2 (according to different thickness); Wage: 1 Yuan/ m2
Water-electricity fee: 0.5 Yuan/ m2; Depreciation of the equipment: 0.2Yuan; Management fee: 1 Yuan/ m2
Total: 21.7 Yuan~27.70 Yuan/ m2
(II) Profit analysis: (Take the small-scale equipment as example), production: 800 m2 per day, at
the price of 58 Yuan/ m2 to sell, and
then the profit per day is that 800 m2 ×58 Yuan/ m2－800 m2×21.7~27.70＝29040~24240 Yuan.
6. Attention
1. Sign the contract printed by Industry and Commerce Bureau.
2. Provide many kinds of certification materials about state-level test report.
3. According to eight-hour production and automation degree, the light quality heat-preserving
composite wall board equipment can be divided into large, middle and small scale for your selection
. We will carry out one dragon service include technology, equipment, installation and testing to
ensure the qualified product.
After purchased the equipment, our company will take responsibility for trainning technical personnel until he can get the skill.
There are many professional technical personnel in our company, they will offer consultation about the
equipment and technology as well as technical training on site for free. And they will go to your
factory for installation and testing for free.
Welcome you to our company for a site visit, we will service for you sincerely.
Recommended Products
Video
Video
Video
Video
Video
Video