Tri-proof Light Super Thin Dimmable Motion Sensor With Corridor Function, Parking lot Use

Name: Tri-proof Light Super Thin Dimmable Motion Sensor With Corridor Function, Parking lot Use
Brand: Shenzhen Merrytek Technology Co., Ltd.

Tri-proof Light Super Thin Dimmable Motion Sensor With Corridor Function, Parking lot Use Product Features Patented Mini Coupling DiPole Antenna Long strip shell, miniature antenna design, no shading Ultra-low RF power output, harmless to human health Support remote control and DIP switch to adjust parameters Low side wave, high adaptability to metal environment Not affected by temperature, humidity, noise, airflow, dust, light and other environments Technical Parameters

Place of Origin Shenzhen, China

Packaging Details Bubble bag + partition + outer box (K=A)

Installation height 3m ( 5m Max )

Model Number MC131D C, MC131D D

Working temperature Built-in: -25~60℃

Supply Ability 10000 pcs/month

super girl t shirt used core i3 desktop multi-function jump starter

Product Description

Tri-proof Light Super Thin Dimmable Motion Sensor With Corridor Function, Parking lot Use

Product Features

Patented Mini Coupling DiPole Antenna
Long strip shell, miniature antenna design, no shading
Ultra-low RF power output, harmless to human health
Support remote control and DIP switch to adjust parameters
Low side wave, high adaptability to metal environment
Not affected by temperature, humidity, noise, airflow, dust, light and other environments

Technical Parameters

Input

Rated voltage	12 ± 1VDC
Working current	MC131D C: 20±2mA MC131D D: 16±2mA
Ripple voltage	< 100mVp-p

Output

Output signal

MC131D C: 0-10VDC dimming signal
MC131D D: PWM dimming signal

Daylight Sensor

Daylight sensor

Daylight priority

Sensing Parameters

Working frequency	5.8GHz ±75MHz, ISM band
Transmit power	1mW Max.
Detection range (radius)	Ceiling installation 3m high: r≥[email protected]/s, r≥2.5m@1m/s Horizontal installation 2m high: r≥[email protected]/s, r≥4m@1m/s Test conditions: product set to 100% sensitivity, no obvious occlusion in 60㎡ room
Installation height	3m (5m Max)

Environment

Working temperature	Built-in: -25~60℃
Storage temperature	-40℃…80℃, humidity ≤85% (non-condensing)

Certification Standards

Certified	CE, RED (Pending)
Environmental requirements	Comply with RoHS 2.0, Reach requirements
IP Rating	IP20

Other Specifications

Wiring	3pin 2.0mm terminal
Installation requirements	Built-in installation
Packaging requirements	Bubble bag + partition + outer box (K=A)
Net weight	13.5±2g
Lifetime	5 Years Warranty

Model Selection

MC131D C	MC131D D
0-10VDC dimming signal	PWM dimming signal
Daylight priority

Function Description

Function	MC131D C, MC131D D
ON/OFF function	N/A
Two-step dimming function	N/A
Three-step dimming function	Stand-by Period be set to "5min/10min/30min"
Daylight harvesting	N/A
Daylight priority	Stand-by Period be set to "+∞"

Product Diagrams

Dimensions

Sensor wiring diagram and functional connections

Wiring & Function

Installation Method

Mounting Configuration

Application Setup

Notice: When installing, please pay attention to the distance between the microwave antenna and the light board.

Default Settings

Sensitivity: 100%
Hold time: 5s
Daylight Sensor: Disable
Stand-by period: 15min
Stand-by Dim Level: 0%

Initialization Process

The sensor will turn on the light at 100% brightness for the first time, and turn it off after 10 seconds. During the initialization period, no external motion sensing signal will be detected.

Application Guidelines

The sensor should be installed by a professional electrician. Please cut off the power before installing, wiring, changing the setting of the DIP switch, etc.
Detection distance is affected by moving object speed, size, installation height, angle, environment openness, and reflector material. Specification values are typical for 165cm/65kg tester in open indoor environment.
Wall installation greatly increases detection distance compared to ceiling installation. Reduce sensitivity for wall installation or contact manufacturer for settings.
Sensor parameters may need reconfiguration in different installation environments - refer to instructions or contact manufacturer.
For indoor use only - outdoor conditions and surrounding moving objects may cause false triggering.
Maximum installation height: 6 meters (optimal: 3 meters). Minimum distance between sensors: 3 meters.
Metal environments may cause false triggering due to microwave reflection - reduce sensitivity or contact for technical support.
Avoid installation near moving signals like fans, DC motors, sewer pipes, air outlets to prevent false triggering.
Microwaves cannot penetrate metal - avoid closed/semi-closed metal lamps and metal/glass obstructions.
Performance may vary with different PWM/0-10V drivers.
Use DC regulated power supply with stable output voltage, low ripple coefficient (<100mV), and load current >25mA.
Product specifications and parameters subject to optimization without prior notice.