2.2 KW Down Pipe Downspout Elbow Machine Electrical Control System
2.2 KW Down Pipe Downspout Elbow Machine Electrical Control System Rectangular downspout elbow pipe Machine Control mode: motor power Main power: 2.2KW Max bending angle: 90 Machine functions: bending and locking function Bending speed: 20-25m/ min Line size (Lx w x h) 1300 mm×650 mm×1500 mm Square downspout roll forming machine components material feeding device main roll forming machine moulds pressing part mould cutting device electrical control system Square Downspout
2.2 KW Down Pipe Downspout Elbow Machine Electrical Control System
Rectangular downspout elbow pipe Machine
|
Control mode: |
motor power |
|
Main power: |
2.2KW |
|
Max bending angle: |
90 |
|
Machine functions: |
bending and locking function |
|
Bending speed: |
20-25m/ min |
|
Line size (Lx w x h) |
1300 mm×650 mm×1500 mm |
Square downspout roll forming machine components
- material feeding device
- main roll forming machine
- moulds pressing part
- mould cutting device
- electrical control system
Square Downspout Pipe Roll Forming Machine main parameters
|
Forming Roller Stations: |
18 Stations |
|
Forming Roller size: |
36 mm (for soft quality sheet) |
|
Forming Speed: |
12 meters / min |
|
Main motor: |
3kw, |
|
Hydraulic station power: |
5.5kw |
|
Capacity Width: |
Less than 200mm |
|
Material of Sheet: |
Soft Quality (Annealed) Galvanized Sheet |
|
Sheet Thickness: |
0.5 to 0.6 mm |
|
Line structure: |
Portal-type frame style, 45# steel |
|
Control mode |
PLC |
|
Total Gross Weight: |
About 4000kgs |
|
Line size (Lx w x h) |
7000 mm×1000 mm×1100 mm |
|
Shipment: |
In 1 x 40 Feet containers |
Roll Forming machine for Production of Drainpipe System
- The downspout roll forming machine is special for manufacturing various size square downspout, Downspout & Rain gutters, Downspipe, rectangular downspout pipes used for resident building or commercial building.
- Downspout or Down pipe is a pipe for conveying rain water from a roof or gutter to the ground or to a drain., also referred to as Leader pipe, Down-pipe or Drains-pout.
- The downspouts are more and more widely applied in rain water storage solution.
Rectangular Downspout Elbow Machine
- Elbows are fittings that attach to the downspout.
- One end of the gutter elbow is crimped so that it can fit inside another elbow or downspout.
- Elbows are used at the bottom of the downspout at ground level to direct drainage in a particular direction.
- Two elbows coming from the gutter are used to span the length of the eave so the downspout can be directly mounted to the wall of the structure.
- The square downspout line is designed according to profile drawing sent from client, thickness 0.4mm-0.6mm
Rectangular Downspout Elbow Profiles (Downspout Crimpers)
Roll Formed Profiles - Square (Rectangular) Downspout
Custom square Downspouts & Rain Gutters machines can be designed according to client’s requirements or downspipe sample.
Pipe Drawing Shows
Recommended Products
