32 - Bit Processor Elevator Board / Car Command Board One Year Warranty

Elevator / car top board / car command board

32 - Bit Processor Elevator Board / Car Command Board One Year Warranty

Model	Product	Size	Specification
SN-MT70-CTB-B Car top board			Using 32-bit processor. Serial communication and simple wiring make it reliable and stable. 8 digital inputs, 7 relay outputs. Support the car digital/analogue weighing signal input. Supporting the LCD panel can conveniently modify and check the system parameters. The input and output of car top board can be programmed to set the function.
SN-MT70-CCB-A Car command board			Can take use of the main manipulator and the vice manipulator inside the elevator's car. Inputs and outputs of eight interfaces can be programmed to set the function. Support the driver,direct drive, firefighting and independent swith input. Support the full-load buzzer alarming output. Every 16 floors configuring one SN-MT70-CCB-A can achieve the cascade, which may be extension up to 48 floors.
SN-MT70-CCB-B Car command board			Can take use of the main manipulator and the vice manipulator inside the elevator's car. Inputs and outputs of eight interfaces can be programmed to set the function. Support the driver,direct drive, firefighting and independent swith input. Support the full-load buzzer alarming output. The SN-MT70-CCB-B can satisfy the application of 36 floors even there is no cascade.

FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?