IP54 Elevator Parts Light Curtain For Elevator Door / Electric Components
Elevator parts light curtain for elevator door (SN-GM9) Feature Cost reduction-without control box Safety-low voltage(DC 24V) Simple connection-less wire Relay output, same as normal one Lighter package Accord with EN81-20 Ecoomic solution Luxury solution(CE/EN81-20) Model 9mm 16mm 35mm Two in one Side open Touch panel Detecting distance 0mm~4000mm Upper light beam 1780mm ± 20mm Lower light beam 25mm ± 5mm 20mm ± 5mm Light beam Qty 156beams 192beams 230beams 320 beams
Elevator parts light curtain for elevator door (SN-GM9)
Feature
Cost reduction-without control box
Safety-low voltage(DC 24V)
Simple connection-less wire
Relay output, same as normal one
Lighter package
Accord with EN81-20
| Ecoomic solution | Luxury solution(CE/EN81-20) | |||||
| Model | 9mm | 16mm | 35mm | Two in one | Side open | Touch panel |
| Detecting distance | 0mm~4000mm | |||||
| Upper light beam | 1780mm ± 20mm | |||||
| Lower light beam | 25mm ± 5mm | 20mm ± 5mm | ||||
| Light beam Qty | 156beams | 192beams | 230beams | 320 beams | ||
| Photoelectric unit distance | 110mm | 55mm | 47mm | 27mm | ||
| Scan speed | 45 milliseconds;22 times/second | |||||
| Vertical tolerance | ≤ ± 20mm | |||||
| Horizontal tolerance | ≤ ± 10mm | |||||
| Angle tolerance | ≤ ± 7° | |||||
| Response time | ≤65 milliseconds | |||||
| Light negative | ≤100000Lux(sunlight) | |||||
| Power voltage | 10~30V DC | |||||
| Output mode | Relay output | NPN(MO/NC),PNP(NO/NC) | ||||
| Anti electricity level | 1500V AC;1 Min | |||||
| Adaptive temperature | -20ºC~+65ºC | |||||
| EMC | GB/T 17626 EN61000 retention memory A level | |||||
| Vibration | 5 Hz-55Hz amplitude 0.19mm 20Min | |||||
| IP standard | IP 54 | |||||
| Cable type&strengeh | Three core cable,stretch resistance≤12N, 1 million times tortion, 4.5m ± 10% | |||||
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.