LSZH Jacket SC APC Simplex Single Mode Fiber Optic Patch Cord 9/125um SMF-28e
High-performance single mode fiber patch cord with LSZH jacket, SC/APC connectors, and 9/125um SMF-28e fiber. Features low insertion loss ≤0.3dB, high return loss ≥65dB, and IEC/Telcordia compliance. Ideal for LAN, WAN, and 10GB networks. Durable pull-proof design ensures reliable performance.
LSZH Jacket SC / APC Fiber Optic Patch Cord , Simplex Fiber Optic Cable Single Mode
A cost-effective solution that provides high bandwidth and transmission rates over long distances. This high-quality single-mode fiber optic patch cable is specifically designed using SMF-28e fiber for ethernet applications. Each connection has great durability and is resistant to pulls, strains and impacts during installation. Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 9/125um single-mode fiber which is immune to electrical interference.
SC optical fiber cords are widely used in fiber optic systems; especially SC single mode products are very popular. SC standard fiber optic connectors are used for telecommunications, CATV, LAN, MAN, WAN, Test & Measurement, Industry, Medical and Sensors. SC fiber optic connectors comply with IEC 61754-13 & CECC 86 115-801 standards. They are well known for general, average applications. We supply single mode and multimode version SC fiber jumper cables and SC fiber optic components.
Fiber Optic Patch Cord is one piece of cable with connectors in both sides. If only one side assemble the connector, it is called fiber optic pigtail.
Cores: simplex, duplex, multi core patch cords.
Cable Jacket: PVC, LSZH, OFNR, OFNP
Cable outer diameter: 0.9mm, 2.0mm, 3.0mm
Fiber Type: SM(9/125um), OM1(62.5/125um), OM2(50/125um), OM3, OM4
Connector Type: FC, SC, ST, LC, MU, MTRJ, MPO, E2000, SMA, FDDI, D4, DIN
Endface type: UPC, APC
Features
High precision fiber optic ferrule
High precision exact alignment
Low Insertion Loss
High Return Loss
IEC Compliant
Telcordia compliant
UPC, PC or APC polished connectors
Applications
These patch cords are used in LAN, WAN and SAN 10GB networks and is able of handling the most challenging telecommunications data transmission requests.
SPECIFICATIONS
| Performance | |
| Insertion Loss | ≤0.3dB(UPC) |
| Return Loss | ≥55dB (UPC) |
| ≥65dB (APC) | |
| Geometry | |
| Radius of curvature | 7-25mm |
| Apex offset | 0-50um |
| Radial fiber height | -50 to +50nm |
| Angular offset | ＜0.3 degrees |
| Fiber roughness | 0-25nm |
| Ferrule roughness | 0-50um |
| Endface Defects | |
| Fiber core | 0 nm2 |
| Mode field diameter | 0 nm2 |
| Ferrule contact zone | ＜10 nm2 |
| Testing and inspection | Lot Sample |
| Epoxy | |
| Temperature coefficient | 120tg |
| Curing method | Outgassed |
| Residual epoxy | Not specified |
| Configuration Control | |
| Data tracking | IL and RL data printed on each cable |
| Serialization | Each cable serialized |
Rema Fiber Optic Patch Cord, Optical Fiber Patch Cord, Fiber Optic Assemblies, Fiber Jumpers
Recommended Products
