Pcb Board Fully Automatic Solder Paste Printer Equipment
Fully Automatic Solder Paste Printer Machine Performance Repeat Position Accuracy ±0.01mm Print Accuracy ±0.025mm NCP-CT(Excluding cleaning and printing) 7.5s HCP-CT(Including cleaning and printing) 19s/pcs Manufacturing process CT 5min Transfer line CT 3min Machine parameter Power Source AC:220 ±10%,50/60Hz2.2KW Air Pressure 4~6Kgf/cm² Air Consumption About 5L/min Operating Temperature -20℃~+45℃ Working environment humidity 30%~60% Machine dimension(without Tower light) 1404
Fully Automatic Solder Paste Printer
| Machine Performance | |
| Repeat Position Accuracy | ±0.01mm |
| Print Accuracy | ±0.025mm |
| NCP-CT(Excluding cleaning and printing) | 7.5s |
| HCP-CT(Including cleaning and printing) | 19s/pcs |
| Manufacturing process CT | 5min |
| Transfer line CT | 3min |
| Machine parameter | |
| Power Source | AC:220 ±10%,50/60Hz2.2KW |
| Air Pressure | 4~6Kgf/cm² |
| Air Consumption | About 5L/min |
| Operating Temperature | -20℃~+45℃ |
| Working environment humidity | 30%~60% |
| Machine dimension(without Tower light) | 1404(H) mm |
| Machine Length | 1140(L) mm |
| Machine Width | 1364(W) mm |
| Machine Weight Approx | Approx: 900Kg |
| Equipment load bearing requirements | 650Kg/m² |
1.Equipment Dimension Diagram
Equipment Size:1140*1364*1404mm
1.Main power supply: AC: 220 ± 10%, 50/60HZ3KW stable power supply with rated current, plug type: British system.
The electrical interface is shown in the above figure:
2.Main supply gas source: An industrial gas source with a stable pressure of 4.0~6kgf/cm2. Tracheal diameter 6mm/8mm/10mm/12mm
Universal type for the front of the trachea, the rear joint only needs to match the size of the trachea
3.Machine Weight:Approx:900kg
2.Equipment usage environment
1. Workshop temperature: 20C~+45 ℃
2. Workshop humidity: 30-60%
3. Electrostatic protection: ESD grounding and electrostatic protection are required
4. Floor load bearing: If the equipment is not used on the ground floor, please pay attention to the floor load bearing capacity, which must be ≥ 650kg/m²
Recommended Products
