Auto Reverse Function Boom Barrier Gate Remote Control For High Traffic

Name: Auto Reverse Function Boom Barrier Gate Remote Control For High Traffic
Brand: Shenzhen Wejoin Mechanical & Electrical Co.

Auto-reverse function remote control boom barrier gate for high traffic Parking Barrier Gate Motor speed and boom type: Maximum Straight Boom Length 3s/4.5m, 6s/6m Open/Close Time 3s, 6s Voltage AC220V Frequency 60HZ Working Temperature -35°C~60°C Housing Dimension 335*285*925mm MTBF 2,500,000 times Weight 40kgs Enclosure Rating IP54 Barrier Gate Function: Manual button can be used for "rising", "down" and "stop" operation* Wireless remote control can be used for &q

Place of Origin CHINA

Packaging Details carton

housing material 304 stainless steel

Color Yellow

operating time 3s, 6s

Model Number DZJ

swimsuit high waist bikini bottom high waist ir learn remote

Product Description

Auto-reverse function remote control boom barrier gate for high traffic

Parking Barrier Gate Motor speed and boom type:

Maximum Straight Boom Length	3s/4.5m, 6s/6m
Open/Close Time	3s, 6s
Voltage	AC220V
Frequency	60HZ
Working Temperature	-35°C~60°C
Housing Dimension	335285925mm
MTBF	2,500,000 times
Weight	40kgs
Enclosure Rating	IP54

Barrier Gate Function:

Manual button can be used for "rising", "down" and "stop" operation* Wireless remote control can be used for "rising", "down" and "stop" operation *Manually rock the landing gear after power failure.

"Self-plug mode" for easy maintenance and debugging.

Optional vehicle sensor, so that it has the function of "automatic tripping of the car", "anti-smashing car" or"automatic lifting of the brake". *With a wealth of low-evel control and status return commands,the charging system computer can provide the most complete control of the switch.

Common Malfunctions and Solutions

-Motor works but there is no reaction on the barrier arm

1. Check up the power supply and the fuse.

2. Check if the remote controller matches the radio receiver;or check up the battery inside and then change it if it is lack of power.

3. Check whether there is disturbance or not.

4. Check up the condition of photocell and loop detector.