Full - Automatic Stator Coil Forming Machine Hydraulic System Driven
Quick Detail: 1. This coil forming machine is used for stator coil final forming, 2.The forming process is done by machine automatically 3. it is driven by the hydraulic system 4. It is controlled by the PLC. 5. This forming machine is of highly efficiency and qualified forming. Technical parameter: Stator I.D 50~100mm Stator O.D ≤160mm Stack height 16~100mm Displacement of cylinder 20F Power supply 380V/50
Full - Automatic Stator Coil Forming Machine Hydraulic System Driven
Quick Detail:
Technical parameter:
|
Stator I.D |
50~100mm |
|
Stator O.D |
≤160mm |
|
Stack height |
16~100mm |
|
Displacement of cylinder |
20F |
|
Power supply |
380V/50/60Hz 1.5KW |
|
Weight |
700Kg |
|
Dimension |
650*900*2300mm |
Description:
Stator Coil Final Forming Machine is used for stator coil final forming, it is driven by the hydraulic system, controlled by the PLC. Its tooling design adopts flexible principles of inner expansion. The outer wrapping and edge forming form the stator winding. It can ensure appropriate winding outside dimension after lacing. It is of highly efficiency and qualified forming. High technology, stable performance and reasonable price.
Required information for quotation: stator drawing before forming and after forming, including stator O.D, stator I.D, stator stack height, and end coil dimension.
Competitive advantages:
It is of highly efficiency and qualified forming. High technology, stable performance and reasonable price.
Regular maintenance
Regularly check if there is water in the filter. If yes, discharge the water.
Regularly check if there is sufficient oil in the atomized lubricator. If not, replenish it.
Regularly check the lubricating condition of guide mechanism, replenish if necessary.
Check and clean up the electrical cabinet once every three months.
Check solenoid valve screws and pipe connectors once every 3 months.
Check filter once every 2 months.
Stator coil forming machine forming process
Recommended Products
