333mm Gutter Downspout Machine Pipe Diameter 100mm
Main Technical Parameters Material Type GI/PPGI Thickness 0.4 mm - 0.5 mm Width 333mm Roller Station 18 Stations Roller & Shaft Material 45# Steel with Chrome Treatment Diameter of Shaft Φ 70 mm Cutter Material CR12 Cutting Method Hydraulic Cutting Drive Type Chain Drive Maximum Forming Speed 10-15 m/min Control System PLC Control Total Power 7.5+5.5 KW Voltage 38 0V 5 0Hz 3 P hases Seaming Method T he seam to be folded inwards . Component & Technical Parameters Manual
Main Technical Parameters
|
Material |
Type |
GI/PPGI |
|
Thickness |
0.4mm - 0.5mm |
|
|
Width |
333mm |
|
|
Roller Station |
18Stations |
|
|
Roller & Shaft Material |
45# Steel with Chrome Treatment |
|
|
Diameter of Shaft |
Φ70mm |
|
|
Cutter Material |
CR12 |
|
|
Cutting Method |
Hydraulic Cutting |
|
|
Drive Type |
Chain Drive |
|
|
Maximum Forming Speed |
10-15m/min |
|
|
Control System |
PLC Control |
|
|
Total Power |
7.5+5.5KW |
|
|
Voltage |
380V 50Hz 3Phases |
|
|
Seaming Method |
The seam to be folded inwards. |
|
Component & Technical Parameters
Manual Decoiler
This part is used to support Coil.
And make the coil in a rotary way.
Bearing capacity: 3T
Inner diameter: 470-530mm
(adjustable according to demand)
Material is 45# Steel with Chrome Treatment.
The processed rollers are smooth, hard and will not rust.
Will not leave any scratches on the sheet when working.
Hydraulic Pump Station
It use 46# hydraulic oil.
The purpose of this pumping station is to control the cutter to start the cutting work.
Control Cabinet
The control cabinet has two modes, automatic and manual.
The unit length of the targeted sheet can be set in the control cabinet.
The system is simple and easy to operate
Cutter
The material of blade is CR12.
With high strength, better hardenability and good wear resistance.
Recommended Products
Video