Double Layer Roof Sheet Roll Forming Machine
Main Technical Parameters Material Type PPGI/GI Thickness 0.3-0.6mm Width 1220mm Roller Stations 11+12Stations Roller & Shaft Material 45# Steel Quenching and Plating Diameter of Shaft Φ70mm Cutter Material CR12 Drive Type Chain Drive Speed 20m/min Total Power 5.5+5.5KW Voltage 380V 50Hz 3Phases Working Flow Decoiling → Material Feeding → Roll Forming → Cutting → Collecting Component & Technical Parameters Decoiler This part is used to support Coil. And make the coil in a
Main Technical Parameters
| Material | Type | PPGI/GI |
| Thickness | 0.3-0.6mm | |
| Width | 1220mm | |
| Roller Stations | 11+12Stations | |
|
Roller & Shaft Material |
45# Steel Quenching and Plating | |
| Diameter of Shaft | Φ70mm | |
| Cutter Material | CR12 | |
| Drive Type | Chain Drive | |
| Speed | 20m/min | |
| Total Power | 5.5+5.5KW | |
| Voltage | 380V 50Hz 3Phases | |
Decoiling → Material Feeding → Roll Forming → Cutting → Collecting
And make the coil in a rotary way.
Bearing capacity: 5T
Inner diameter: 470-530mm
(adjustable according to demand.)
In order to avoid damage to the machine by impact when the machine is running, we have installed a brake device for you.
Feeding Table & Pre-Cutter
Guide the coil come into the correct position and passed to the roll forming machine.
Also including a pre-cut device, it is convenient to pre-cut the coil when want to using other color or thickness coils.
It use 46# hydraulic oil.
The purpose of this pumping station is to
Supply the power to the cutter, so that the cutter can work.
Material is 45# Steel with Chrome Treatment.
The processed rollers are smooth, hard and will not rust.
Will not leave any scratches on the sheet when working.
The unit length of the targeted sheet can be set in the control cabinet.
The system is simple and easy to operate.
Cutter
The material of blade is CR12.
With high strength, better hardenability and good wear resistance.
Recommended Products
Video
Video
Video
Video
Video