Led Strip Controller DC12-24V 3A/3CH 2.4GHz RF wireless RGB strip
controller
Mini series LED controller reflected LTECH 12 years' powerful
independent R&D ability in LED field, Its volume
is only 1/3 of the vonventional controller, but can implement
features such as dimming, RGB and color temperature control. Its
high cost performacne and creative design, allowing users to enjoy
the benefits and convenience.
Feature:
A. RF remote is fashionable, slim, light and easy to carry while
receiver is small, exquisite and easy to install.
B. RF remote with low power consumption, long distance, strong
obstructions penetrating ability, independent ID
interference - free and other properties.
C, 4093/road grey scale (most of them is 256 in the market), high
grayscale performance is more outstanding, the light is more
gentle, dynamic changing modes become more rich and colorful.
D. One receiver compatible with six different functions of the
remote, that is use one receiver can experience
dimming, color temperature and RGB control.
E. RF remote is simple and intuitive to use, a variety of actions
at a glance, what you see is what you get,
F Automatic sleep mode, when the touch remote unattended operation
over 30s, it can automatically enter
standby mode to exten battery life.
| Working voltage | DC3V(Battery CR2032 ) |
| Working Frequency | 433.92 MHz |
| Remote Distance | 40-50m |
| Working Temp. | -30℃~55℃ |
| Dimensions | L104×W60×H9mm |
| Weight (N.W.) | 42g |
Parameter:
Remote:
- Model:M3/M6/M7
- Working Voltage:3V DC(battery CR2032)
- Working Frequency:433.92MHz
- Remote Distance:30m
- Working Temp:-30℃-55℃
- Dimensions:L104×W58×H9(mm)
- Weight(N.W):42g
Receiver:
- Model:M3-3A
- Input Voltage:12-24V DC
- Max Current Load:Max 3A×3CH
- Max Output Power: 108W(12V)/216W(24V)
- Working Temp:-30℃-55℃
- Dimensions:L135×W30×H20(mm)
- weight(N.W):47g
Total weight(G.W.): 135g
The Learning ID Method of Remote Control:
Remote control has been matched to the receiver before leave
factory, if deleted accidentally, you
can learn ID as follow.
Learning ID: Short press ID learning button on the M4-5A receiver, the running
light is on, then
press any key on the M2 remote control, the running light flashes
several times,
activated.
Cancel ID: Long press ID learning button on the M4-5A receiver for 5
seconds.
Attn: one receiver can be matched with max 10 same or different kinds
remote.
