Application:
Model XTM35SA single phase electronic DIN rail active energy meter
is a kind of new style single phase two wire active energy meter,
it adopt micro-electronics technique, and imported large scale
integrate circuit, use advanced technique of digital and SMT
techniques, etc.
It has its completely independent intellectual property rights and
minimum size. The meter completely accord with relevant technical
requirements of class 1 single phase active energy meter stipulated
in international standard IEC 62053-21.
It can accurate and directly measure 50Hz or 60Hz active energy
consumption from single phase AC electricity net. This meter has
white backlight source eight digits LCD displays shows the active
energy consumption. It has following features: good reliability,
small volume, light weight, specious nice appearance, convenient
installation, etc.
This meter has already got the patent certificate from China State
Intellectual Property Office at present. Patent certificate NO. ZL
2012 3 0473501.3, any other country patent certificate are in
assessing.
● 35mm standard DIN- rail installation , complying with standard
DIN EN50022.
● Bipolar width (Modulus 17.5mm), complying with standard DIN43880.
● Standard configuration 7+1 digits display (9999999.1kWh) by white
backlight source LCD. May select 7+1 digits display (999999.1kWh)
without backlight source general LCD.
● Standard configuration pulse output passive (polarity),May select
distant pulse output passive ( nonpolarity). And contact with all
kind of AMR system conveniently,Complying with standard IEC
62053-31 and DIN 43864.
● Two LED instructions power supply state (green) and signal of
energy impulse (red).
● Automatic detection the direction of the flow of load current.
And instructions on LCD (when display HELP 1 on LCD, that is
meaning the direction of the flow of load current reverse).
● Single direction measurement single phase two wire active energy
consumption. It is nothing with direction of the flow of load
current. Complying with standard IEC 62053-21.
● Directly connect operation, there are two types wiring you may
select. Standard configuration type S wiring, may select type U
wiring .
● Extension terminals cover, in order to protect to use safety
| Technical parameters |
| Model | Accuracy | Reference Voltage(V) | Current specifications(A) | Starting current(A) | Insulation performance |
| XTM35SA | Class 1 | 127 230 | 5(30)A,10(60)A, 5(100) | 0.04 | AC voltage 4kv for 1 mimute,1.2/50us waveform impulse voltage 6kv. |
| * If you need different reference voltage or current specification,
please advisory our sales personnel. | |
Outer and mount dimension:
Wiring diagram (Type S):
Terminal Note:
1 Lnlet phase line
4 Lnlet neutral line
3 Outgoing phase line
6 Outgoing neutral line(lnlet from top,
outlet form bottom)
20 and 21 Port of pluse output passive
