Multi Tariff Three Phase Din Rail KWH Meter Digital RS485
Communication AMR System
Functions and Features:
＊ 35mm standard DIN rail installation, which is complying with
standard DIN EN50022; Or front board setting (mouting holes center
distance 63 mm), user can choose any one by himself;
＊ 10 pole width (Modulus 12.5mm), which is complying with standard
JB/T7121-1993;
＊ Directly connection as type S (Inlet from bottom, outlet from
top), and CT or CT&PT operation is also acceptable.
＊ 3 tariffs, support for 12 daily period of times. You can set the
date argitrary which can automatically read the meter every month.
And my select single tariff in weekend;
＊ There is a clock and maintenance-free backup lithium battery
inside. Battery capacity detection and display all the time. It can
keep the electricity data for 12 months. The data can be kept
forever after power cut off;
＊ Single direction three components measure three phase four wire
active power consumption. It is nothing with direction of the trend
of load current. Complying with standard IEC 62053-21.
＊ External or short terminal cover are both acceptable, just based
on your requirement.
＊ 6+1 (999999.9kWh) or 5+2 (99999.99kWh) digits LCD display with white backlight, it can be arbitrary set by
user from far infrared or RS485 communication port;
＊ 6 LED indicated every power state, signal of closed power
impulse, distant power impulse and data communication state ;
＊ Automatic detect the direction of the trend of load current, and
indicated on individual LED;
＊ There are a polarity port of pulse output passive closed and a no
polarity port of pulse output passive distant (the output rate is
10 or 100 imp/kWh, which can be selected). It can contact with all
kind of AMR system conveniently, complying with standard IEC
62053-31 and DIN 43864;
Technical Parameters:
| Name | Model | Accuracy | Rated Voltage (V) | Rated Current (A) | | 3P4W Energy Meter | 100TCD | CL 1.0 CL 2.0 | 3*220/380V 3*57.5/100V | 1.5(6)A, 3(6)A, 5(30)A, 10(50)A | | 3P3W Energy Meter | 100TCD | CL 1.0 CL 2.0 | 3*100V 3*380V | 15(90)A, 20(100)A, 5(40)A, 5(100)A |
|
Application:
Model RDK100TCD three phase electronic DIN rail active energy meter
is a kind of newest 3P4W/3P3W multi tariff electric meter to
measuring the active energy, it adopt micro-electronics technique,
and imported large scale integrate circuit, using advanced
technique of digital and SMT techniques, etc.
The meter meets relevant technical requirements of class 1 three
phase active energy meter stipulated in international standard IEC
62053-21..
It can display total energy consumption by LCD with backlight.
With following features such as: good reliability, small volume,
light weight, specious nice appearance, convenient installation,
and etc, the meter is widely used in any occasions.
Outer and mount dimension:
Wiring Diagram:
Safety precautions:
＊ Use only isolated tools.
＊ Place the meter only in dry surroundings.
＊ Make sure the AC wires are installed correctly before activating
the current/voltage.
＊ Never break the seals or open the front cover as this might
influence the functionality of the meter.
＊ Do not through, drop, kick or other physical violence to the meter
as there are high precision components inside that will break or
make the meter measure inaccurate.
＊ Do not mount the meter in area's with harm gas, dust, mildew or
insects or on unstable surfaces.
