16S 320A Intelligent Brushless Controller RC boat esc For Efoil
|Voltage||Current||Size(mm)||weight(g)||BEC (Volts/Amps)||Box Programming support||Computer Programming support||Firmware update|
The power of the motor forward/ reverse can be set.
Automatically detection the throttle route or can be set a fixed
number by manual operation.
Set the required speed with the speed adjustment potentiometer. The
sensor measures the actual value of the engine speed through the
ring gear on the flywheel and sends it to the controller. The
actual value in the controller is compared with the set value. The
control line is arranged and enlarged, and the output shaft of the
actuator is driven. The fuel pump pin is pulled by adjusting the
connecting rod to adjust the oil supply amount, thereby achieving
the purpose of maintaining the set rotation speed.
This electronic governor can also choose the size of the unevenness
according to the needs of the engine. When the stepless speed
regulation is performed, the electronic control system eliminates
the difference between the set speed and the actual speed caused by
the load change, so that the engine maintains the original set
speed. According to the needs of the unit, the unevenness
potentiometer can also be adjusted to achieve a satisfactory static
adjustment rate of the speed control system.
The electronic governor is also equipped with a variety of
accessory devices. According to the needs of the unit, the
corresponding accessories can be installed to realize the functions
of automatic synchronization, load distribution and load preset.
The electronic governor is characterized by the ability to
independently determine the speed regulation characteristics, and
to determine the optimum torque characteristics, idle speed
characteristics and transition characteristics when all accessories
are installed. The electronic dispatcher can adapt to the
requirements of different models.
Setting function value:
1. Reverse: On/Off.
3. Frequency: 8KHz, 16 KHz, 32 KHz.
4. Acceleration: Soft / Medium / Hard.
5. Accumulator type:NiCd/NiMh,Li-Ion/Li-Pol,LiFe.
6. NiCd/NiMH CUTOFF:×0.05,0.4V,0.5V,0.6V,0.7V,0.8V,0.9V,1.0V.×0.05 means the cut off voltage
is 5% the voltage while connecting.
7. Number of cells:Auto,2S,3S,4S,5S,6S,7S,8S,9S,10S,11S,12S,16S.
9. LiFe cutoff:2.2V,2.3V,2.4V,2.5V,2.6V,2.7V,2.8V
10. Cut Off Type::Slow down,Hard. l
11. Power limited forward: Off, 75%, 50%, 25%.
12. Power limited reverse: Off, 75%, 50%, 25%.
13. Delay time when direction convert: 0.25S, 0.5S, 0.75S, 1S,
1.5S, 2S, 3S, 5S.
14. Reverse point:Auto,fixed 1.0mS,fixed 1.1mS,fixed 1.2mS,fixed 1.3mS.
15. Forward point:Auto,fixed 1.7mS,fixed 1.8mS,fixed 1.9mS,fixed 2.0mS.
16. Throttle curve: Logarithmical,Linear,Exponential.
17. Rotation direction: Left, Right.
18. Timing monitor (TIMING MONTITOR): ON, Off.
Note:the red mark is the factory default value,you can setting function value by
1.Payment :T/T ,Paypal,West union .
2.Production lead time :5 days for 100-200 pcs ,10days for
3.Sample can be delivered within 3 days.
4.Discounts are offered based on order quantities .
5.MOQ: 2 pcs.
1. Items will be shipped within 3 business day after payment
2. Items are shipped from DHL Express ,UPS ,EMS,, reach most of the
countries within 3-7 days respectively.
3. Warranty Period is 2 yrs for this item.
4. If product can not work, or find it as defects within in 7 days
after receipt, please contact us, we will replace or refund.
5. All emails will be answered within 1 working day.