HEPA Filtered Stainless Steel Cleanroom Air Shower Channel , PLC
External Size: 2000x2000x2180mm
Internal size : 1500x1930x1910mm
HEPA filter efficiency: email@example.com
SUS nozzle: 24pcs
Blower way : two side blowing
Emergency stop buttons in both side
These cleanroom entry systems decontaminate workers and products
entering a cleanroom environment.
Clean Air Products offers a range of air shower configurations that
work efficiently to reduce particle loads. Our staff of experts
will ensure you get the air shower that fits your needs exactly.
Standard Straight-Through stainless steel 304 Air Showers room
quickly and effectively remove
particles that will otherwise be carried into your cleanroom.
Operating Features :
Our decontamination stainless steel air showers room feature rugged
construction and adjustable,
high velocity air jets. Durable and Cleanroom-Approved Painted Cold
Rolled Steel Shell
No Silicone used - only Low-Outgassing Epoxy or Urethane Sealant
1: stainless steel framed Safety Glass Doors with Hydraulic Door
2: LED Recessed Light Fixture with Wall Switch
3: Adjustable stainless steel 304 Nozzles
4: Removable High Pressure Interior Nozzle
5: 0.75kW, ealed Ball Bearing Continuous Duty Motor
6: Photoelectric sensor, automatic adjustable blowing time (0-99
touchable panel and timer with LED display.
7. Double doors with mechanical or electric interlock.
8. HEPA filter,Material stainless steel 304, anti-static
6: A powder failure safety function,Circulation wind,EVA seal
7. Modular design, easy for transportation
8. Customer sizes are possible
Parts-Cleaning Straight-Thru Stainless steel Air Showers room are
available in a variety of sizes
and configurations. They can be used with carts, conveyors, pallets
continuous-part operations. These cleanroom entry systems quickly
effectively remove particles that will otherwise be carried into
KEL-AS1200P-2 Stainless steel Air shower room
External size(mm) (WXDXH)
Persons per cycle
Air shower Duration
Factory set at 12 second (adjustable)
1: Entirety Sus304.(T=1.0/1.2mm)
2:External is steel with power coated,
Internal is SUS304.(T=1.0/1.2mm)
3: External is steel with power coated.
Internal is SUS201. (T=1.0/1.2mm)
Air flow of fan(m3/h)
Fan run (r/min)
Nozzle in stain less steel
LED Fluorescent Lamp
75% @ 5um
380v/50Hz OR 380v/60Hz
Customer’s design is available.
1: Control panel 2: SUS Nozzle 3: Infrared ray inductor
4: Per-filter 5: Power inductor 6: working inductor
7: Emergency switch 8: HEPA filter 9: Door
The greatest source of particulate contamination in a cleanroom
is the operator. Air showers are installed between change areas and
The air shower enhances cleanroom operating protocol by serving as
a reminder to all
operators that they are entering a controlled environment.
Personnel therefore develop
the habit of gowning up properly before entering the air shower.
All of equipment is individually factory tested for safety and
performance in accordance with international Standards. Each unit
is shipped with a documentation outlining the tests undertaken and
the units individual results for each unit.
Factory test include:
--functional test and visual inspection
--electrical safety tests
--air velocity testing
--purification rank test (if need)
Our equipment is warranty for 1 year excluding consumable parts and
All equipment is shipped with a comprehensive use’s manual complete
with a report documenting all test procedures.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or
Consumable parts illustration:
1: Pre-filter: each one should be replacement in each 6 month, but
it can refresh no more three times.
2: HEPA filter: each one should be replacement in each half and one
T/T in advance, 30% before place the order, 70% when you see copy
Or 30% T/T in advance before place the order, 70% LC at sight.