Detailed Product Description
Product Name:sanken arc6000i Arc Stud Welding Machine
Material: carbon steel, Stainless Steel
Stud Range: 10mm-25mm
Power Source: 380V / 50-60Hz
Feature: Light Weight , Small , Portable
Inverter Drawn arc stud welder which could weld dia 10-25mm stud
and shear connector .
Arc6000i arc stud welding machine has the characteristics of small
size, light weight, easy to move. Suitable for outdoor operation,
with advanced technology, is to save energy.
It is well applied in electric power, steel structure and bridge
sanken ARC6000I Inverter Arc Stud Welder
Sanken arc stud welding machine (pull arc stud welding) welding
10-25mm bolt and similar workpieces ideal welding equipment, with
welding speed (0.1-2 seconds), high strength, can penetrate
welding, requires no electrodes and flux, no boreholes, good shape,
simple operation, high efficiency, greatly reduce the cost and
reduce labor intensity and so on a series of advantages at a suit.
As the steel structure building in the steel beam and floor bearing
plate and stud (shear studs) three welding is one of the stud
penetration welding (strong current to three at the same time the
melting welding in steel beam), is characterized by its high
welding strength, fast construction speed, operator of technology
requirement is low and so on the characteristic. In the electric
power construction, the railway construction, the bridge project,
the steel structure construction project is widely used in.
1, ultra portable with only 70 kg, is the same type of welding
machine half weight,
Welding diameter range is 6-25mm.
2, welding time and welding current precise digital control
3, manual, automatic switching function
4, high speed AVR single chip processor, high work efficiency,
stability, fast response, high speed, good welding performance.
5, liquid crystal display allows the operator to the welding
process and working status at a glance.
6, automatic monitoring system, all the functions of the monitoring
results are clearly displayed on the machine LED panel
7, the superior chopping frequency provides a smoother arc,
compared to the conventional transformer / rectifier based stud
welding machine which offers faster response speed and superior
8, the welding material for carbon steel, stainless steel welded
9, smaller welding splash and more rounded appearance.
10, constant temperature cooling fan, thermal overload protection,
phase loss protection circuit.
11, has been widely used in steel structure, electric power, ships,
boilers, transformers, automobiles, construction, bridges and other
Welding range: M10-M25mm
Welding current: 300-2500A
Welding time: 10-3000 MS
Supply voltage: 380V/3 phase
Feet inches: 700*360*530mm
No-load voltage: 80V
Protection level: IP23
Insulation grade: F