Hinge Axis Vertical Telescoping Single Acting Hydraulic Ram Low
Single-acting cylinders transfer force and motion in one direction
only. Acts on the piston to push the piston rod out.
When manufacturing multistage cylinders, the number of stages are
able to produce, which is limited only by the physical confines of
the cylinder requirement.
Cylinder designs include welded and screwed type, welded and
bolted, fully bolted or tie rod or can take the form of your
All cylinder products carry an 12 months warranty.
1. Improved quality system
2. Doubled manufacturing and warehousing area
3. High quality products
4. Very competitive price
5. Great Service
All our piston rods are hard protection coated, such as hard chrome
plate, or if required, can be coated with an alternative treatment
more suitable to the application. High strength damage resistant piston rod provides 100,000 PSI
minimum yield material in 1" through 4 1/2" diameters.
pressure ranges: could be customized
Piston Ø: customized
Piston rod Ø: customized
Mounting types: customized
Max. stroke speed: according to the product types
|Structure||Single acting cylinders|
|Stage||3~5 stage cylinder|
|Max inner tube||170mm,180mm,195mm,200mm,210mm,etc|
|Mounting distance||325mm/345mm/425mm or as customers’ requirements|
|Tipping Weight||6-60 Ton|
|Seal Type||Parker,NOK, BUSAK or as customer's requirement|
|Piston Rod||Chrome or nickel plated,ground & polished piston rod|
lift tables and the list goes on...
Every DALLAST single acting telescopic cylinder is individually
tested before leaving our plant to assure proper performance and
leak-free operation.Snap on glass filled bearings that absorb
contaminants without damaging cylinder walls. Nylon tipped set
screws that conform to packing nut threads to decrease the
probability of packing nuts backing off.
The most common problems when selecting a hydraulic cylinder are as
A. Retract dimension (Center of pin to center of pin)
B. Stroke length (Inches)
C. Mounting types
D. Port Size and Type (SAE or NPT)
E. Pressure rating (PSI)
F. Bore Diameter (Inches)
G. Application details
1. Various operation instructions such as: products inspect and
control ,Receiving inspection control ,sampling inspection
operation instruction, process quality inspection operation
2. Pre-sale service and free consultation service.
3. Quality control service includes pre-acceptance, departure
inspection, arrival inspection, PDI delivery inspection.
4. Guarantee period is subjected to warranty instruction (1 year/
2000 hours whichever comes first).
5. Free after-sale service during the warranty refers to problems
caused by quality issues; any non quality problem occurred, we will
charge the maintenance fee according to relevant standard.
6. Service Center all over the world for after sales problems.