1.The pulp moulded industrial pack products(PMP) are made of waste
paper such as used newspaper,waste carton, off-cut in paper making
mills and printing factories.The wasted paper is smashed in the
hydrapulper and adjusted to a certain consistecy.After being added
to some chemicals, the fiber in the pulper will cover the wiremesh
of the mold with the effect of the vacuum. The wet blank becomes
the finished products after drying, hot pressing.
2.The main raw material is wasted paper and can be collected easily
at low cost.The water in production is all recirculatedly used, and
there is no wasted water and exhausted gas discharged during the
production process.Besides, The used pulp molded packages could be
recycled and would never pollute the earth because of its
3.the main energy used to dry the pulp products can be choosed
among0# diesel oil,natural gas,LPG which is depending on local
cost. The steam,heat conducting oil and heavyoil also could be
applied to dry theproducts,but the investment and field
occupationwould be increased.
4．The pulp molding industrial pack products have been used for more
than 60years in the world. It is an ideal material to pack
industrialproducts packing due to its good performance in
protection and low cost.
the specifications of the pulp molding production lines are devers
due to different pulp molding diescustomer base, market
demands,labor cost,engery cost,field availability and climate in
different areas, and even the same customer has different
requirements on the styles for different products.Considering this,
our company developed many pulp molding production lines with
different specifications to meet the customer's requirement.
Here are some regular specifications as follows
1, Rotary productionlines,including 5 types:type P-WY production
line, type P-W2Y production line, type P-W3Y production line, type
P-W4Y production line,typeP-W5Y production line.
2, Reciprocate production line,5 types:type P-800 production
line,type P-1200 production line,type P-1300 production
line,typeP-1600 production line,type P-1900 production line.
The pulp molded products made by the above production lines could
be used as follows: the shock-proof inner pack for the home
applicance,communication Pulp molding pulperunits,ceramics,
electronics, hardware, computer, furniture, artcraft, foods,
healthcare products, toys and others . also these production lines
could be used to produce 30-cell egg tray, egg box/carton(6-cell,
10-cell, 12-cell,6+6-cell, 15-cell, 18-cell etc),fuit tray(for
apple,tomato,pear etc),cup carrier(4-pack,2-pack),some medical-care
products and some pulp molding products with fixed shape and big
If these production lines are used for the egg tray,egg
box/carton,fruit tray,coffee tray, health care products,the
production effeciency will be lower compared with egg tray
production lines. And there will be no advantage on the production