Product: PU wheels/pulley for skate board, 70*45mm, pink and green
Why there are thousands of types of wheels?
The wheels have specific features of hardness, size, shape...and
Skateboards wheel, 4 units for one set, are made of polyurethane.
Wheels have different diameters, shapes and hardness. Small wheels
start fast, but lack of stamina, suitable for skills; large wheels
can easily glide on less flat ground. Skateboards are also very
particular. In addition to bearing accuracy (such as ABEC1, ABEC3,
ABEC5, ABEC7, etc.) has an impact on speed, it depends on the
performance of the wheel.
Good abrasion resistance, good bounce,
When choosing materials, it should be considered to be suitable for
different ground roads, such as floor roads, cement roads, asphalt
roads and so on. No matter what road you slide on, the wheel must
be flexible, wear-resistant, and moderate in hardness. It must also
ensure that the wheel has enough friction coefficient on the road
The first is hardness, and the skateboard wheel is usually a
polished polyurethane. The proportion of polyurethane in the wheel
is different, and the hardness of the wheel is also different. A
wheel with a hardness of 85A(A refers to hardness) is relatively
soft and suitable for rough pavement taxiing.
The sound is minimal when taxiing. It is a good choice for friends
who like to go shopping. However, the 85A wheel is relatively
non-wearable because it is soft, and it is easy to break the
interval layer when doing things such as side skid brakes. In
general, today's skaters use 97A-103A wheels. This kind of hardness
wheel is suitable for smooth marble and relatively flat roads, as
well as U pools, platforms and other props.
Wheels such as 85A at smooth leveling are also soundless. But in
rough places and on the U pool, there will be a huge rumble(this
sound often makes the racer boil). The transparent or translucent
wheel does not use 103A. It is too hard and will burst. It is best
to use only props made of all WOOD materials.
Followed by the diameter, the 38-40 mm wheel is now used by very
few people. This wheel starts and accelerates quickly, but the
stamina is small, and it is only suitable for very flat roads. It
is characterized by a fairly flexible movement. Friends who like
small movements can try. The 45mm -50mm wheel is the most suitable
wheel for the road type.
52-60mm wheels are more suitable for use on props. Because the
action on the props requires strong power, the flat action hopes
that the lighter the board is, and the weight on the props can
sometimes bring more inertia and impact, making you taller and
farther. In the wild, you can use more than 60mm of cross-country
Professional mountain skateboards use large rubber wheels.
And the rebound, the rebound of the wheel is very important.
Although there are no parameters to refer to. However, the stronger
the rebound, the stronger the ability to overcome obstacles. If you
don't know how well your wheels bounce back, you can do a little
experiment. Remove the bearings in the wheel, you throw the wheel
hard on the ground, rebound the high wheel, the wheel will bounce
to the ceiling, the bottom rebound wheel, will only jump on the
ground two times.
On the smooth ground, perhaps, the two wheels can run as fast, but
in the slightest rough road, the advantage of high-rebounding
wheels can be immediately demonstrated.
High quality for high end market
20 years experience in this industry
Integrity in business
|Keywords:||Skateboard wheels, PU wheel|
|Supply Ability:||20000 Unit/Units per Day uni wheel skateboard|
|Packaging Details:||4pcs per set in one plastic transparent shrinked bag|
|Port:||Shanghai, China mainland|
|Lead time:||Est. Time(days): 30 or To be negotiated|
|Place of origin:||Jiangxi, China (Mainland)|
|Material:||Casting PU (polyurethane)|
|Model Number:||7045mm, 78A|
|Size of product range:||50-97mm|
|Core:||yes/No, up to the request|
|Durometer:||78A 80A 83A 85A 90A 92A 95A 98A 99A 100A 101A 102A 55D 60D|