Description features:

Place of Origin:
China Shanghai

Brand Name:
SBM



Certification:
ISO9001: 2000

Model Number:
ZTM86, ZTM125, ZTM165



Terms of Payment:
L/C,T/T
Minimum Order:
1 Set/Sets
Packaging:
export standard
Delivery Lead Time:
30 days






Key features of the Straight Centrifugal Grinding Mill
(Compared with the Raymond Mill, there are the following advantages)

1.
Save The amount of energy consumption which the straight centrifugal grinder's

blower consuming is only 6% of mill, but Raymond Pulverize is 81%. In addition,the consumed energy when the spiller slide the stone occupy whole energy is 25%,

but straight centrifugal grinder is no exist this consume.



2.
High-efficient In same condition, the grinding roller of straight centrifugal grinder

can be through a large 2.3 times area than Raymond Pulverize .



3.
High-using rate Grinding roller and grinding ring of Raymond Pulverize are sunken

in middle parts, so the metal amount that discarded is only 35% of originalweight, but materiel in straight centrifugal grinder fall from top to bottom, so the metal amount can reach a high to 55%.



4.
Accident insurance If bolt or iron ore fall into the Raymond Pulverize, this will conduce to breaking shovel, roller suspender transmutation. But straight centrifugal grinder will not appear such condition.



5.
Well using against high hardness and hard-process material Some high-rigidity material, such as carborundum, corundum, zirconium, the output will fall down because the grinding roller and grinding ring of Raymond Pulverize are sunken in middle parts. But in straight centrifugal grinder, it skives material up and down equably, so the output shows much more stabilization.



6.
Wet production Water is allowed using in Straight centrifugal grinder.



7.
Occupation of area is small It does not need to allocate whirlwind separator and

a lot of pipelines .etc, so the occupation of land space is small.



Straight Centrifugal Grinding Mill Application




This straight centrifugual grining mill applies to grind material into thick powder. It's mainly used in the mining, construction materials, chemical, and metallurgy. Can be pressed various

kinds of not flammable and not explosive supplies crushed, for example, carborundum,

and Zircon sand, Quartz, Granite, Barite, Marble, Limestone, Steatite, Plastermodel, Scoria, Chinaware, Glass. Can crush material below scale 9.5 of Moh'shardness.Operation principleAmong the working process, motor brings along milling wheel rack to circumgyrate

through trigonometry wheel and center axle. That axle hoist at rubbing roller hanger

to rub through bearing roller rub roller hanger while rotating at the sametime cross arm, roll along the round while rubbing the roller. The cubic supplies is separated by umbellate hammer and plate, fall symmetrically between the roller and ring. And after pulverizing arranging from cannulation underlayer. The dustremoval air blower make minus-press for the inlet and outlet. There is no dustcontamination and at the same time it debars the quantity of heat in the machine. Production with water: the comminution process is almost the same as dry production.

The difference is: comminution with water, and the separate quomodo with water.This can be designed by clients need.



Technique parameter of Straight Centrifugal Grinding Mill






Type





Max. Feed size(mm)





Product size(mm)





Capacity(t/h)





Power of Main motor(Kw)





Dimension(mm)







ZTM86





16





0-2.8





7-11





37





2600?100?400







ZTM 125





25





0.044-5





15-55





90-110





?300?600





ZTM 165


35


0.044-5


30-120


185-200


?600?200





Note: 1.The average size of product is adjustable 2.The capacity is that feeding materials are not through the classifier and 90%the size of feeding materials are smaller then 2.8mm.



1. Save The amount of energy consumption which the straight centrifugal grinder's 2. High-efficient In same condition, the grinding roller of straight centrifugal grinder 3. High-using rate Grinding roller and grinding ring of Raymond Pulverize are sunken 4. Accident insurance If bolt or iron ore fall into the Raymond Pulverize, this will conduce to breaking shovel, roller suspender transmutation. But straight centrifugal grinder will not appear such condition. 5. Well using against high hardness and hard-process material Some high-rigidity material, such as carborundum, corundum, zirconium, the output will fall down because the grinding roller and grinding ring of Raymond Pulverize are sunken in middle parts. But in straight centrifugal grinder, it skives material up and down equably, so the output shows much more stabilization. 6. Wet production Water is allowed using in Straight centrifugal grinder. 7. Occupation of area is small It does not need to allocate whirlwind separator and The difference is:comminution with water, and the separate quomodo with water.This can be designed by clients need. Note:1.The average size of product is adjustable 2.The capacity is that feeding materials are not through the classifier and 90%the size of feeding materials are smaller then 2.8mm.