Boat GP585OB

Description features:


1 Specifications

L.o.a. 5.80 m
Beam 2.20 m
Depthmiship1.10 m
Weight 1.389 t
Fuel tank 140L
Navigation Speed < 31kn
Endurance 240km
Passengers 5 P
2 Navigation Restriction

This boat should be used within 5 nautical miles offshore, and should be able come back to sheltered area within 2 hours in loaded condition, and should be used in the wind force less than class 6(Beaufort Scale), wave height less than 1 meter.
3 Equipment

3.1 Mechanical& Electrical
3.1.1 Main Engine
This boat uses YAMAHA 115HP outboard engine.
3.1.2 Electrical
The electrical power uses 120AH maintenance free batteries, which is used to start engine and used by the navigation equipment, etc. The batteries are charged automatically by the main engine.
3.2 Communication Equipment (Option)
This boat is able to be installed with 1 set of VHF cordless phone.
3.3 Signal Equipment
The bow is installed with 1 horn, 1 port light, and 1 starboard light. the stern deck is installed with one stern light.
3.4 Fire-fighting & Life-saving Equipment
This boat can be installed with the life-saving equipment according to the regulations of local maritime administration.
3.5 Discharge Equipment
This boat is equipped with Attwood Sahara S1100 automatic bilgepump.
System Brief Introduction

1 Propulsion System

YAMAHA 115 Outboard Specifications as follows:
Discharge 11730cc 3
Cylinder Stroke 90?8mm
RPM 45005500r/min
Please refer to the main engine manual for other specifications of the main engine.
2 Wheeling System

The wheeling type is fore control. Ignition key, wheel, throttle, instruments (tachometer, fuel gauge, trim indicator) are accessories, and are installed on the starboard dash panel. For the instruction, please refer to the engine manual.
3 Fuel System

The fuel tank is positioned at the bottom in the midship, with capacity 140L. The inlet and air vent are at the port in the aft. The fuel tank has fuel level gauge, the readout is through the fuel level indicator on the console.
4 Ventilation System

The main engine is outboard engine, has its own ventilation system. Please refer to the main engine manual.
5 Bilge Water System

The bilge pump is positioned at the bottom near the transom, can be controlled manually or work automatically. The required power is 12Volt. The manual control button is positioned on the dash panel in the console. The grey water outlet is on the starboard.
6 Power System

The battery is installed behind the stern chair. The power switch is installed beside the battery. The console is installed with the switches of mechanical and electrical equipments, lighting equipments, signaling equipment, communication equipments, discharge equipment.


1 Specifications

L.o.a. 5.80 m
Beam 2.20 m
Depthmiship1.10 m
Weight 1.389 t
Fuel tank 140L
Navigation Speed < 31kn
Endurance 240km
Passengers 5 P
2 Navigation Restriction

This boat should be used within 5 nautical miles offshore, and should be able come back to sheltered area within 2 hours in loaded condition, and should be used in the wind force less than class 6(Beaufort Scale), wave height less than 1 meter.
3 Equipment

3.1 Mechanical& Electrical
3.1.1 Main Engine
This boat uses YAMAHA 115HP outboard engine.
3.1.2 Electrical
The electrical power uses 120AH maintenance free batteries, which is used to start engine and used by the navigation equipment, etc. The batteries are charged automatically by the main engine.
3.2 Communication Equipment (Option)
This boat is able to be installed with 1 set of VHF cordless phone.
3.3 Signal Equipment
The bow is installed with 1 horn, 1 port light, and 1 starboard light. the stern deck is installed with one stern light.
3.4 Fire-fighting & Life-saving Equipment
This boat can be installed with the life-saving equipment according to the regulations of local maritime administration.
3.5 Discharge Equipment
This boat is equipped with Attwood Sahara S1100 automatic bilgepump.
System Brief Introduction

1 Propulsion System

YAMAHA 115 Outboard Specifications as follows:
Discharge 11730cc 3
Cylinder Stroke 90?8mm
RPM 45005500r/min
Please refer to the main engine manual for other specifications of the main engine.
2 Wheeling System

The wheeling type is fore control. Ignition key, wheel, throttle, instruments (tachometer, fuel gauge, trim indicator) are accessories, and are installed on the starboard dash panel. For the instruction, please refer to the engine manual.
3 Fuel System

The fuel tank is positioned at the bottom in the midship, with capacity 140L. The inlet and air vent are at the port in the aft. The fuel tank has fuel level gauge, the readout is through the fuel level indicator on the console.
4 Ventilation System

The main engine is outboard engine, has its own ventilation system. Please refer to the main engine manual.
5 Bilge Water System

The bilge pump is positioned at the bottom near the transom, can be controlled manually or work automatically. The required power is 12Volt. The manual control button is positioned on the dash panel in the console. The grey water outlet is on the starboard.
6 Power System

The battery is installed behind the stern chair. The power switch is installed beside the battery. The console is installed with the switches of mechanical and electrical equipments, lighting equipments, signaling equipment, communication equipments, discharge equipment.