Description features:
Sand Making Machine (namely PCL Vertical shaft impact crusher) is of high-power and low-consumption, which is designed depending on several years hard work and study of mechanical mining equipment. Sand Making Machine absorbed the advanced technology of the same products of Barmac Company of America, now is of the international level. Sand Making Machine plays an important role in crushing minerals into pieces. PCL Vertical shaft impact crusher is widely used in all kinds of mineral, cement, corhart, bauxite chmotte, carborundum grain, glass raw material, machine made construction sand, stone stock and all kinds of metallurgy slag, especially carborundum, sintered bauxite, magnesite, and so on material with features of very hard and anticorrosion. And Sand Making Machine is more productive than other kind of crushers. Working Principle:
Stone less than 50mm enters sand making machine though conveyor belt. Stone is crushed by hitting other stones. Material falls down to impellor cavity. Under great centrifugal force, it hits material that coming downwards. After hitting each other, they force a vortex between impellor and shell, and hit each other several times, finally smaller stone comes out, and goes to vibrating screen. Satisfactory material is transported to sand washing machine, however overlarge material will go back to sand making machine to be recrushed. Output sizes can be made according to customers requirement. If input size is larger than the designed size, other crushing equipment will be necessary.Characteristics:
Simple structure and low operating cost; high efficiency and low consumption; has the function of fine crush and crude grinding; slightly influenced by the moisture content of material, and the max moisture content is 8%; more suitable for crushing mid-hardness and high-hardness materials; cubic shape of final products, high density of piling up and low iron pollution; more wearable and easy maintenance; low working noise and light dust pollutionModels:PCL600 ~ PCL1350Model: PCL600
Rotate speed of impeller (r/min): 2000 - 2600
Max feed size (mm): 30
Power (Kw): 2¡Á30
Weight (including motor) (t): 5.6
Output capacity (t/h): 15
Overall dimensions (mm): 2500¡Á1600¡Á2260Model: PCL750
Rotate speed of impeller (r/min): 1600 - 2100
Max feed size (mm): 35
Power (Kw): 2¡Á45
Weight (including motor) (t): 7.5
Output capacity (t/h): 25
Overall dimensions (mm): 2780¡Á1800¡Á 2700Model: PCL900
Rotate speed of impeller (r/min): 1300 - 1700
Max feed size (mm): 40
Power (Kw): 2¡Á55
Weight (including motor) (t): 12
Output capacity (t/h): 35
Overall dimensions (mm): 3900¡Á 2160¡Á2770Model: PCL1050
Rotate speed of impeller (r/min): 1100 - 1450
Max feed size (mm): 45
Power (Kw): 2¡Á110
Weight (including motor) (t): 16
Output capacity (t/h): 50
Overall dimensions (mm): 4660¡Á2450¡Á3660Model: PCL1250
Rotate speed of impeller (r/min): 950 - 1200
Max feed size (mm): 45
Power (Kw): 2¡Á132
Weight (including motor) (t): 22
Output capacity (t/h): 80
Overall dimensions (mm): 5600¡Á2950¡Á4000Model: PCL1350
Rotate speed of impeller (r/min): 900 - 1200
Max feed size (mm): 50
Power (Kw): 2¡Á160
Weight (including motor) (t): 26
Output capacity (t/h): 100
Overall dimensions (mm): 5340¡Á2940¡Á3650Notice: Any change of Sand Making Machine technical data shall not be advised additionallySand Washing Machine
 This series XSD Sand Washing Machines are a kind of water washing style equipment to be matched with the sand making machine and can reduce the dust and stone powder which mixes with the final sand, so sand making machine can improve the quality of the sand. XSD series Sand making machine is used in building plant, quarry, concrete plant, dam building, casting-70 sand, glass factorys quartz sand and refilling pressure sand. Working Principle of Sand Washing Machine:
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.Characteristics of Sand Washing Machine:
Reasonable structure, large capacity, low consumption, little loss of the sand during the washing process, low failure rate.Models: XSD2610, XSD2816, XSD3016Model: XSD2610
Wheel Size (mm): ¦µ2600¡Á1000
Max feed size (mm): 10
Power (Kw): 5.5
Weight (t): 2.7
Capacity (t/h): 50
Overall dimension (mm): 3255¡Á1982¡Á2690Model: XSD2816
Wheel Size (mm): ¦µ2800¡Á1000
Max feed size (mm): 10
Power (Kw): 11
Weight (t): 3
Capacity (t/h): 100
Overall dimension (mm): 3540¡Á3000¡Á2880Model: XSD3016
Wheel Size (mm): ¦µ3000¡Á1600
Max feed size (mm): 10
Power (Kw): 15
Weight (t): 3.3
Capacity (t/h): 150
Overall dimension (mm): 3845¡Á3000¡Á3080Notice: Any change of  technical data shall not be advised additionally
Also,our company produces other mining machines and construction machines.Such as:crushers, grinders, mills, sand makinging machines, ect. welcome to enquiry!